I have finished boarding with soundbloc board and they are tapered edge - I have two bags of multi finish left over brand new from the other day can I use this and scrim to tape and fill the joins? It’s a big area 4m x 2m so I wouldn’t like to skim it all? Any advice would be helpful...
I would like to render a External Porch overhang from an extension, but unsure how I could go about this? I would like a modern smooth finish to the underside. The area is around 1m x 2m which overhangs... Currently it is just beams so unsure as to which board / method to use to...
Just want to clarify rendering any wall including garden walls to ground level is not right? Shouldn't there be a gap at the bottom. I've seen lots of people render direct to ground.
I always keep about a 3 inch gap.
:RpS_unsure::RpS_unsure: I have a floor which was built on a slope I want to level it out, the floor is in a outbuilding. It goes from level to slope at the end of the building, with a slope of over 2 foot down at the back.
I want to level the flooring so I can use it for storage.
There is no...
Hi I have a brick outbuilding in good condition. Id just like some tips on how about I can plaster the walls, at the moment, it is bare brick but id like to plaster it out. Victorian Bricks with a concrete floor.
I have a damp Victorian wall, in which what looks like the old sand and cement render has blown. Would it be better to remove the render (its a big blown area). or just to repoint the original bricks and paint.
Also I'd like some rendering tips because I want to render a small garden wall...
Hi just wondering if you can get coloured or white architectural plasters? I just had a thought that maybe a coloured architectural plaster mght look good on a feature :RpS_biggrin: so any advice would be good.
Ok thanks guys! I decided to use a backing coat on the brick, (Hardwall) then I did multi-finish on-top but I have a problem with a another wall where I keep getting cracks in my new plaster? Please help.
Hi I'm relatively new to multi-finish just wants some good tips on smoothing it out better. Also what is best way to sand / prep multi-finish for painting? Additional Info: Solid Victorian Wall. I would also love to know how to do corners and little gaps with multi-finish too. Thanks.