Search results

Members online

  1. H

    Weber cracked with mesh

    Bobski well know idiot
  2. H

    Weber cracked with mesh

    Literally wetting my pants good stuff mate..idiots forum is maybe what u shud join as maybe you don't have any knowledge worth sharing
  3. H

    Weber cracked with mesh

    Hi all, just had same peal grey Hairline cracks...Full mesh over rendaid...first cracks in my time and been same system for years and don't know what to say to customer or how to fix it.. any advice welcome... piss take good also but any help guys???
  4. H

    Thistle spray finish

    awful I turned up to s Portch skim once it was make good multi there absolute shite
  5. H

    Thistle spray finish

    Looks good,Definitely worth spraying I think, I do 2 decent hits most days and it's hard on the body, shame u can't do ceilings but walls is z good start
  6. H

    Thistle spray finish

    Thanks guys, so will any indoor product go through my eze k4? Just sick of the hwk n trowel
  7. H

    Thistle spray finish

    OK thanks for the info I'll need another machine then
  8. H

    Thistle spray finish

    Thanks vincey, I will give the thistle spray a go first as its the cheaper product I belive, and cool so only walls can be sprayed didn't know that one, thanks, just
  9. H

    Thistle spray finish

    Thanks vincey, I will give the thistle spray a go first as its the cheaper product I belive, and cool so only walls can be sprayed didn't know that one, thanks,
  10. H

    Thistle spray finish

    Hello all, I wish to spray indoors with my eze k4 I am new to this method,but am a time served plasterer. I wanted to find out best product for indoors that's most cost effective and gives a finish that's acceptable, anyone used thistle spray finish with good results?
  11. H

    When an interior wall becomes an exterior wall...

    Hi, I find using a angle grinder to cut lines In wall every 2 inches or so; will weaken the old plaster/render ready to use a sds drill to remove
  12. H

    Thin coat float

    Sorry moving sideways on all lifts rather than lift at a time leaves longer dry line
  13. H

    Thin coat float

    If I was hand applying I'd have a man on each lift so you can controll the dry line by all moving across together, but with machine and hose maybe difficult to do, by hand u can go a meter on each lift at the same time moving sideways rather than up or down, hope this helps somehow
  14. H

    The f**k**g sun

    Thanks never knew the 2 hour rule handy to know that one to back yourself up in those situations, most render looks bad with sun at the side no matter how good u are ! Apart from k render that's been same day scrape with i bar I can get that pretty good with sun on it,all down to the ruling off...
  15. H

    Hi

    like the reply guys but builder is one of my top ones and agreed 14 a meter which I now regret slightly but one 80 meter wall with no windows,next sand cement will probably say 20 a meter maybe...cheers for the help though basically get as much as possible lol
  16. H

    The f**k**g sun

    Yes not for long tho and a same day scrape with a i bar will reduce the shadows a fair bit
  17. H

    Hi

    Hi all I'm Chris, hope ur all good, any ideas on render rates anyone? Cheers
  18. H

    render prices

    Hi guys, I'm Southampton based and looking for render prices per m2 to compare, don't want to undercut myself or drive the price down for others, any help much appreciated Chris
Top