Search results

  1. spunky

    Excuse the cheesiness lol

    No but It’s just a tool sure it would be fine, you could use it to brush you’re teeth who knows lol I asked Danny to delete the video because it was supposed to be an eye opener for what different tools do and it turned into the same old Cocky site plastering b*ll***s I’m not posting a video...
  2. spunky

    Mono or thincoat

    Yep whatever it is you will end up painting it in 10 years all comes down to what texture you want
  3. spunky

    Excuse the cheesiness lol

    I already had a bottom screed from the bead
  4. spunky

    Excuse the cheesiness lol

    Everyone works different anything over 2.4 I’ll do the lower half first this is usually where sockets etc are if you watch the video I plumbed the screed horizontally across the walll (that’s a lie I didn’t plumb it) but the block work was bang on ruled the bottom used that as a screed for the tops
  5. spunky

    Excuse the cheesiness lol

    The whole beads were a pain in the ass I had to set the reveals to the wall the windows were a mile out so it was just guessing really of how far you’re straight is to the bead
  6. spunky

    Excuse the cheesiness lol

    Whatever mate go and knock one out and fill you’re ego up you sad c**t.
  7. spunky

    Excuse the cheesiness lol

    The finished floor was painted and they wanted a stop bead so it was only a horizontal screed
  8. spunky

    Excuse the cheesiness lol

    You may have a different dictionary to me it may say you’re a hero and a bit of a “w**k*r” in small print if you put you’re reading glasses on
  9. spunky

    Excuse the cheesiness lol

    No you’re been negative it’s a great tool and you say it’s pointless look it up in the dictionary you weirdo
  10. spunky

    Excuse the cheesiness lol

    I agree mate that’s why I posted the vid great tool well worth it for backing coats (y)
  11. spunky

    Excuse the cheesiness lol

    So if it’s only ok for the centre of walls mate youre 10 to a dozen get a job as a site agent so you can wank yourself off being negative x
  12. spunky

    Excuse the cheesiness lol

    I’m happy with it you penis I don’t over promote myself it means someone has confidence in what there doing what you’re problem is I haven’t a clue lol
  13. spunky

    Excuse the cheesiness lol

    Blah blah blaaaahhhh
  14. spunky

    Excuse the cheesiness lol

    I can do another video but it’ll cost ya!
  15. spunky

    Excuse the cheesiness lol

    Really please don’t say I was wearing lipstick in you’re head
  16. spunky

    Excuse the cheesiness lol

    f**k me you’re a tough crowd I can see why I stopped bothering sticking my head in here you’re a bunch of idiots :LOL:
  17. spunky

    Excuse the cheesiness lol

    You don’t you use a hawk and trowel if any of you skimmers noticed there was a screed in the wall the cheaters there to just put it on
  18. spunky

    Excuse the cheesiness lol

    Haha here we go my dick is bigger than youres I’d put 100k on it I’d clean that spot board faster than you can do it with a hawk and trowel let me know we can film it you f**k**g numpty :LOL:
  19. spunky

    Excuse the cheesiness lol

    Yes I’ve heard that everyone’s on it, if I went subbing I probably would but I stick to two coat I always have the little devil on my shoulder saying don’t do it lol
  20. spunky

    Excuse the cheesiness lol

    Andy if you do make one in two hours and are interested in selling one I’ll buy one off you for 40 quid plus postage my mate wants one
  21. spunky

    Excuse the cheesiness lol

    I doubt it would have the depth to hold the gear Rossi worth a go who knows worth a shot
  22. spunky

    Excuse the cheesiness lol

    Not saying you’re wrong though I did open the box and said to myself f**k me is that it :LOL:
  23. spunky

    Excuse the cheesiness lol

    It’s like cleaning a car though Andy go to the Arabs down the road it’s 20 quid and spotless or do it yourself for two hours
  24. spunky

    Excuse the cheesiness lol

    Hi Danny hope alls good in life mate I haven’t spoken to you for probably ten years lol why do we need pics
  25. spunky

    Skimming over SBR

    It’s an artex ceiling it doesn’t matter what you paint on it it could still end up on the floor in the morning
  26. spunky

    Excuse the cheesiness lol

    Kirk would be so proud haha that’s the cheater or go devil he uses such a good tool well worth getting one for backing coats or render there not cheap it cost me 60 quid inc postage from the states but bangs it on
  27. spunky

    Excuse the cheesiness lol

    Deleted at request
  28. spunky

    New built uneven ceiling?

    We all have days when we see our work in a bad light like that you know when it looks undescribable like wtf is that? And it looks s**t but this is a blatant two trowel finish in that light it will show up everything but I’d be getting onto the builder that’s shocking
  29. spunky

    New built uneven ceiling?

    I would never ever buy a new build it’s finished 90 percent of the time by rough bastards lol
  30. spunky

    advice needed please

    Cladding (y)
  31. spunky

    Worst Krend finish ever

    It’s as if they created there own unique finish……
  32. spunky

    Log burner question

    Has anyone used that vistas heat resistant stuff? We had to plaster an entire 20m wall at 35mm because they wanted the finish flush with the fireplace Omfg it’s like using concrete the aggregate is massive try ruling it lol, once it was on the next day it’s pretty much like spar the amount of...
  33. spunky

    New mtec 200 machine pro set

    Welcome to the world of a 4 hour panic attack lol
  34. spunky

    2 people on a machine

    My biggest worry would be halos if you get a bit carried away with the first pass but I guess you just have to be carefull
  35. spunky

    2 people on a machine

    We spray in a three man gang always and probably average however good the job is lol but 60m is a good hit for us, this is one coat my mate was working in Exeter and watched a two man gang spray two huge gables he said they did it in two passes and sprayed it very wet is this how everyone does...
  36. spunky

    New Rendering Tender

    Don’t know what vpi is but I’d stay away from Krend
  37. spunky

    Window rubber marks on render

    If it is Krend there’s something that reacts and you end up with lovely purple streaks, it may not be it could be another product but guaranteed all this through colour render thing is bullish.it at some point unless you want to set scaffold up and pressure wash you’re house every year for 1200...
  38. spunky

    Window rubber marks on render

    Get ready to paint you’re house I wouldn’t waste any money replacing anything
  39. spunky

    Kite winder

    Good job though surrounded by loads of oak I bet they had a fifty grand carpet and the walls are so clean I drop it farkin everywhere doing them !!:LOL:
  40. spunky

    Kite winder

    Damian I’m not trying to teach you how to suck eggs mate try sponging them and a plastic (y)
  41. spunky

    Kite winder

    Or is that the light and I’m being harsh:X3:
  42. spunky

    Kite winder

    Did you use a plastic or steel trowel Damian looks like a steel?
  43. spunky

    £650 a cut

    300 per day is a half decent wage nowadays ?
  44. spunky

    2003 Timber frame render cracking everywhere

    There’s buildings done in the 1500s without cracks if anything the old way was a lot better than the modern shite you see nowadays
  45. spunky

    Patchy/drippy KRend, what went wrong?

    Sorry it’s an old thread but dovey ring Krend and ask for a rep to come out (y)
  46. spunky

    Patchy/drippy KRend, what went wrong?

    How the f**k can the builder look at the first pic and say it’s drying uneven when there’s white lines running down the wall
  47. spunky

    Patchy/drippy KRend, what went wrong?

    If it was dubbed out there shouldn’t be a need for two base coats one would be enough for mesh, if they have said they have fully meshed the building did they charge for it? The stains are water damage they have screwed up and done it in the wrong weather
  48. spunky

    Sand Coverage

    Or was that one coat f**k knows haha sounded good though :birra:
  49. spunky

    Sand Coverage

    Doesn’t a tonne do 30-40m two coats?
Top