Search results

  1. Jrend

    Mono help needed

    Can anyone do a job for me in the next few weeks.Its 90metres of mono with ashlar detail(4 lines) all low level 2.3 high. All existing render will be knocked off.Its a old bovis homes site and the render has failed so is being done under nhbc.Heres a look at the house ,its the one on the right...
  2. Jrend

    Mono, Help needed

    Can anyone do a job for me in the next few weeks.Its 90metres of mono with ashlar detail(4 lines) all low level 2.3 high. All existing render will be knocked off.Its a old bovis homes site and the render has failed so is being done under nhbc.Heres a look at the house ,its the one on the right...
  3. Jrend

    Re-coating shoddy damaged Krend

    Been to price a job over the weekend and the customer is very unhappy with the quality of work left by previous renderers.Also he has had a new pattern imprinted driveway and they have got black pigment all over render.What system would you use? I have talked him into using bucket coat with a...
  4. Jrend

    Colour match

    Hi, what is the closest colour to polar white k rend. I will be using weber or parex. I'm trying my best to get out of using k rend. Cheers.
  5. Jrend

    Renderer wanted in stoke

    I need someone to do 130 metres of thin coat this week(weber lac and texture).Its a bob on job but havnt got the time to do it.Its a 2 metre fascia 3 metres off the ground using scissor lift ,there is 5 or 6 breaks in it so no struggling. There is also 30 metres of mono too which is bitty,a few...
  6. Jrend

    Renderers Needed Crewe (weber)

    Is there anyone available to do 70 metres this Thursday in Crewe,a gable and a front.Its on site so cscs will probably be needed.Good rates,phone JFE finishing on 07921 711838.
  7. Jrend

    Brick slips

    Does anyone know where i can get a red smooth 7mm brick slips from.I have tried wetherbys but they dont do a red smooth in 7mm only 15mm/ Cheers
  8. Jrend

    Ritmo M for sale

    Hi,i have a ritmo m for sale.It comes with 8.75 kva generator ,material/air pipe ,spray gun,water hose, av3000 water pump suction hose and barrel.The machine is a 2012 and is in descent nick,im looking for £4000 but am open to sensibleoffers.No messers /timewasters please,you know who you are...
  9. Jrend

    Ritmo.M for sale

    Hi,i have a ritmo m for sale.It comes with 8.75 kva generator ,material/air pipe ,spray gun,water hose, av3000 water pump suction hose and barrel.The machine is a 2012 and is in descent nick,im looking for £4000 but am open to sensible offers.No messers /timewasters please,you know who you...
  10. Jrend

    Ritmo M Rotor/Stator

    How many bags/pallets your getting out of yours.Im using the standard non clamp version,the last 2 i used we got around 300 bags from them using mainly weber/monorex running at around 13/14 bar.I usually get around 10/12 pallets but the last 2 have been rubbish,anyone else having same trouble?
  11. Jrend

    Ebay bargain M-tec M300

    Good buy for someone here,but you better be quick . mtec m300 rendering machine | eBay
  12. Jrend

    Ritmo M 110v for sale

    As above including new honda genny.The machine was new this year from lord and downing and comes with av 3000 water pump water butt around 30 metres of water pipe and 15m material pipe.The machine has done around 3/400 metres of mono and thats it.PM me for more details .Im selling to sell this...
  13. Jrend

    Need a lift with some tyrolean

    Is there anyone available in the Wigan area can give me a lift with some tyrolean on tues/wed this week. There is around 70 metres in total and there will be 2 other lads flicking .You will be paid on the day a good day rate . Pm me if your interested. Cheers.
  14. Jrend

    Shocking work

    [/URL][/IMG][/IMG][/URL][/IMG][/URL][/IMG] :RpS_w00t::RpS_w00t::RpS_w00t: I take it these boys have never heard of tarps or maskers....Jesus this is the worst iv seen in ages.How can you make bucket coat look so dam ruffff.
  15. Jrend

    K Rend TC 15/30

    As anyone got any if this in pearl as I'm 2 tubs short on a job that needs finishing asap.
  16. Jrend

    Krend ft

    My mate has just asked me to do a job for him Krend ft onto render carrier board.The spec is hpx base mesh then ft.do krend not do a light weight version like weber and parex.Dont fancy using ft onto render board.
  17. Jrend

    Ritmo L

    Hi if you come across this advert on ebay do not bid he is a scammer. Plasterers Render Pump | eBay I won this item on Monday and has now been re-listed.He was asking for payment in full before i could go to pick it up,I told him i would pay in full on collection, he refused to let me collect...
  18. Jrend

    Krend K1

    Gave this a try yesterday.First off it sprayed ok through ritmo.Sprayed 20 metres and finished about half three.Got there this morning after temps being just above freezing to find it rock hard full of shrinkage cracks.Half was on new block and rest was on rough faced brick.Dont think I will be...
  19. Jrend

    16 kva Genny on Ebay

    Found this earlier, good price for someone. Honda.3 phase 16 KVA generator with 240 volt outlet.
  20. Jrend

    Delivery charges

    Got a price off Encon to ship 30 bags of parex from Bristol To Wakefield today and they wanted £250. :RpS_scared: I know fuel is expensive but that's taking the piss.
  21. Jrend

    Ritmo for sale

    Just found this on ebay if anyone interested. Plasterers Render Pump | eBay
  22. Jrend

    Spraying hp12 and hpx

    Has anyone sprayed hp12and hpx with a ritmo?How long can you leave it in the pipes and how quick do you have to be on it to rule/trowel? Cheers.
  23. Jrend

    Bags of Weber for sale

    As above 32 bags in ivory collection from wigan £180 the lot.Pm me for collection info.
  24. Jrend

    Parex Maitie

    Does anyone know how many pins per metre parex spec for this system as i cant find it on there web site. Cheers
  25. Jrend

    How doo Fellas

    Been on here a while but thought it rude not to introduce myself.Im jay from sunny wigan.Been on the machine rendering for the best part of 8 years so i'm still learning and hope i can give a few tips aswell.
Top