Hi to all and need help over a massive cock up

rtt94

New Member
Hi all new to the forum need a some help!! So my landlord has put ewi boards on the house not very good and has got some idiots to put ceresit zu base coat and meat on to the boards no the issue is the boards were put on uneven and I know the stuff is thin coat they didn’t use meshed 6mm corner beads they used 15mm pvc bead and didn’t even put them on correctly they are all out of whack so to get to my point what render will stick to this product to be used for a tylorene finish? And I turned down doing my own property because Iv been off the trowel for a good few years and recently set up a civils company so just don’t have the time but this mess I now need to sort so please If you can point me in the right direction thanks so much
 
Hi all new to the forum need a some help!! So my landlord has put ewi boards on the house not very good and has got some idiots to put ceresit zu base coat and meat on to the boards no the issue is the boards were put on uneven and I know the stuff is thin coat they didn’t use meshed 6mm corner beads they used 15mm pvc bead and didn’t even put them on correctly they are all out of whack so to get to my point what render will stick to this product to be used for a tylorene finish? And I turned down doing my own property because Iv been off the trowel for a good few years and recently set up a civils company so just don’t have the time but this mess I now need to sort so please If you can point me in the right direction thanks so much
Highly unlikely you can do anything, landlords installed ewi badly to his own property.

You can leave ... :1 months notice
 
Hi all new to the forum need a some help!! So my landlord has put ewi boards on the house not very good and has got some idiots to put ceresit zu base coat and meat on to the boards no the issue is the boards were put on uneven and I know the stuff is thin coat they didn’t use meshed 6mm corner beads they used 15mm pvc bead and didn’t even put them on correctly they are all out of whack so to get to my point what render will stick to this product to be used for a tylorene finish? And I turned down doing my own property because Iv been off the trowel for a good few years and recently set up a civils company so just don’t have the time but this mess I now need to sort so please If you can point me in the right direction thanks so much
Mind your own business.

Landlord's problem not yours
 
Hi all new to the forum need a some help!! So my landlord has put ewi boards on the house not very good and has got some idiots to put ceresit zu base coat and meat on to the boards no the issue is the boards were put on uneven and I know the stuff is thin coat they didn’t use meshed 6mm corner beads they used 15mm pvc bead and didn’t even put them on correctly they are all out of whack so to get to my point what render will stick to this product to be used for a tylorene finish? And I turned down doing my own property because Iv been off the trowel for a good few years and recently set up a civils company so just don’t have the time but this mess I now need to sort so please If you can point me in the right direction thanks so much
Are you a u tube plasterer out of his depth
 
Top