Mtec 200

We had a few issues, can u give us any information on what speed u using?
What size gun gap ?
Your airline is it flush with the gun?
When getting your consistency before hoses what are u aiming for?
As sometimes we been happy with thickness and then had problems
You need it wetter than you would to hand apply for it to spray.
 
You’re all at it now
The Office Reaction GIF by NETFLIX
 
Aren't you asking for any support or advice from p1 surly if it's their machine you're struggling with they'll help
Hi , you are right but I’m too busy to go on a course and p1 miles away, done all the floating/rendering etc 30 yrs handballing.
But the machines fair play they good.
But they messy and aggro getting in the van and taking out. But when they work they brilliant. Been on these courses before and most a waste of time , as what they tell me I already know and basically I can tell them the wrong methods they using. But I keep quiet and listen to their way of doing things. A lot of times they are daft as if they were to put me next to them side by side on the same elevation or wall etc. They be clueless. They normally reading from there folder and would not be able to go at a decent speed and quality work.it’s like all these new products grits etc, u don’t need any of them ( use the products we have used for yrs) and the right graded sand u be fine
 
Hi , you are right but I’m too busy to go on a course and p1 miles away, done all the floating/rendering etc 30 yrs handballing.
But the machines fair play they good.
But they messy and aggro getting in the van and taking out. But when they work they brilliant. Been on these courses before and most a waste of time , as what they tell me I already know and basically I can tell them the wrong methods they using. But I keep quiet and listen to their way of doing things. A lot of times they are daft as if they were to put me next to them side by side on the same elevation or wall etc. They be clueless. They normally reading from there folder and would not be able to go at a decent speed and quality work.it’s like all these new products grits etc, u don’t need any of them ( use the products we have used for yrs) and the right graded sand u be fine
I get you know how to work hard, but a machine used correctly is a saver on your body.
 
Hi , you are right but I’m too busy to go on a course and p1 miles away, done all the floating/rendering etc 30 yrs handballing.
But the machines fair play they good.
But they messy and aggro getting in the van and taking out. But when they work they brilliant. Been on these courses before and most a waste of time , as what they tell me I already know and basically I can tell them the wrong methods they using. But I keep quiet and listen to their way of doing things. A lot of times they are daft as if they were to put me next to them side by side on the same elevation or wall etc. They be clueless. They normally reading from there folder and would not be able to go at a decent speed and quality work.it’s like all these new products grits etc, u don’t need any of them ( use the products we have used for yrs) and the right graded sand u be fine
The course doesn’t teach you how to Render. It teaches you how to use the machine.
 
Hi , you are right but I’m too busy to go on a course and p1 miles away, done all the floating/rendering etc 30 yrs handballing.
But the machines fair play they good.
But they messy and aggro getting in the van and taking out. But when they work they brilliant. Been on these courses before and most a waste of time , as what they tell me I already know and basically I can tell them the wrong methods they using. But I keep quiet and listen to their way of doing things. A lot of times they are daft as if they were to put me next to them side by side on the same elevation or wall etc. They be clueless. They normally reading from there folder and would not be able to go at a decent speed and quality work.it’s like all these new products grits etc, u don’t need any of them ( use the products we have used for yrs) and the right graded sand u be fine
There's no point in having a machine if you don't know how to use it buddy I get it you're old school and don't take this the wrong way stuck in your ways you'd be a fool not to take 1 day to sort it out and learn how to go about it you are falling behind the times pal
 
Top