.Dream team.

000

Well-Known Member
When staples just won’t cut it !


30mm clouts nails & thin coats. Beads

986B574E-761C-4346-8953-ECEC877E7290.jpeg
 
Staples never have cut it . Clouts are the best by far . Was years ago and still are to this day. Them staple guns are wank
Ha , I’ve got one of those wank staplers it has its place (No doubt )
30mm clouts are sh!t hot ...
 
Literally hundreds of plots done to a high standard like that. Nails top and bottom and stapled in-between.
I've always used the gear I was going to float with I.e browning hardwall s/c and got em plumb with a level must of been doing it wrong then . Ahh well
 
I know I wasn't it's you talking b*ll***s nailing top and bottom and stapling the middle never heard shut like it in my 33 years on the trowel
Well I trump you with my 41 years lol
I'll see if there are some old photos knocking about somewhere to put up.
Whether I have or not the fact remains that I fixed thousands and thousands of f&s beads fixed with nails top and bottom and stapled in-between. These were on Celcon/Thermalite/Durox blocks and even the guys plastering some of these houses for me couldn't believe how solidly you can fix beads using staples.
 
Yiu can
Well I trump you with my 41 years lol
I'll see if there are some old photos knocking about somewhere to put up.
Whether I have or not the fact remains that I fixed thousands and thousands of f&s beads fixed with nails top and bottom and stapled in-between. These were on Celcon/Thermalite/Durox blocks and even the guys plastering some of these houses for me couldn't believe how solidly you can fix beads using staples.
You can't get a decent fix on thermalite/ durex with nails or staples you'd be able to pull em off with your little finger . Even if you was in the mortor joints it's like dust . Ha ha
 
Yiu can

You can't get a decent fix on thermalite/ durex with nails or staples you'd be able to pull em off with your little finger . Even if you was in the mortor joints it's like dust . Ha ha
Well thankfully you're wrong.
40mm large headed clouts get a good fixing in Celcons etc., as do 14mm staples. Proven over many years.
 
Top