Gritters

Members online

John j

Mono Don
Which is best grit to use . Never used much and to be fair not a big lover but some walls gonna need it on this job.
 
1600964082142.png
How dare you.
 
Doesnt seem to be a prob regards cost of gear so thought just grit em .
Is there a grit that's alot finer then others .
Don’t know mate I hate the stuff. A builder I sometimes do some graft for slaps the shite everywhere, so on his jobs I just run a light scraper over it to get the worst off before I start.
 
Roller on the PVA , go over wall with stiff brush whilst still wet
 
Which is best grit to use . Never used much and to be fair not a big lover but some walls gonna need it on this job.
I gritted all my walls that I used the mesh on John.
Personally I think that the best grit for internal work is Parex Microgobetis, but I usually use BG Bondit.
 
Which is best grit to use . Never used much and to be fair not a big lover but some walls gonna need it on this job.


Wickes bonding agent mate. Nice fine small aggregate and dries fast too.

You can get in bigger containers, branded differently and works out cheaper (than wba)...
 
I wouldn't trust any grit, no matter how good, if the wall is covered in wallpaper paste. Gotta get as much of that off as possible before even thinking about gritting, as the paste will be the weakest link.
Plasterer weakest link.
 
Top