Battery mixers!!!
- Thread starter zombie
- Start date
That's it I'm sold already...how much & where from pal?
Even better 1 of them link things would be great!
Olican
Private Member
superspread
Well-Known Member
Does it cut the scrim close to the floor on vertical joints or if you was taping upwards, tight to the ceiling line? So you really recommend them oli?For me personally Andy it was like using a collated drill or stapler first time. Walked round a room and scrimed all the internals in a fraction of the time . Got mine from belmore tools
Ffs just buy 1 so you can tell me if there shite and save me twenty notes!
Olican
Private Member
Start from the top and work to floor,. You soon learn where it cuts to . Change the blade every 5 or so rolls and give the wheel a little clean now and then , let me see if I can find a vid
Nah yer putting me off its sounding high maintenance I want a plug and play scrim cutter!
Olican
Private Member
Olican
Private Member
A few scrims have a slightly bigger cardboard tube (usually the cheap s**t) just put about 300mm scrim around the holder. It'll make sense if you get a roll that doesn't fit tight
Mate...this is getting worse it's got more flaws now & it wont accept my cheapo scrim!
Groove37
Well-Known Member
Does it work with the grey spider scrim oli
Olican
Private Member
Yes Mike, decent scrim that
Groove37
Well-Known Member
I’m using the pink stuff at the mo seems decent aswell
Mug..hes just pmd me saying there shite really
Groove37
Well-Known Member
Oh well sell it to some dumb ass for £40
Groove37
Well-Known Member
You not going to splash out then
Nahhhh I'm a reyt tyre kicker il wait for @olicans 2 year review once honeymoon periods over!
Groove37
Well-Known Member
Crack on mate just order it what’s the worst that can happen you may actually think it’s the best thing you ever bought
Phhhhh piss & wind!!!
Rossi46
Private Member
Cheers Tam
Plasterers1StopShop
Well-Known Member
We had guys having issues with them. The gearing seemed to go after 8 months
Thanks
But disappointing, but good to know.
A lot of people hold the older type in high regard.
Maybe changed the design or engineering?
Plasterers1StopShop
Well-Known Member
Im not 100% sure to be honest on any changes. I know guys who had the first versions and they didnt last the year.
Personally, I think they are a great back up if the power goes on the job and you still need to work. I certainly wouldnt be chucking away the Eibenstock
The bloke I learnt off had one retired now still got it,
I got one when I set off had it years couldn't break it and then lost it on a site,
You are talking about the flex
superspread
Well-Known Member
XxxxL??
superspread
Well-Known Member
Mm
essexandy
The Lake Governor
Where do they stock these?XxxxL??
Asking for, errr, a friend.