Recent content by Tfg

Tried a few small patches with a gyro gun The suction on the render is high. After 72 hours my mix is powdery and it doesn't adhered to the wall very well, any suggestions?

should it be water proof pva?

Hello guys I have decidied to make my own Tyrolean mix this is what I have come up with. I cannot get hold of cullamix I want where I live unfortunatley. The substrate is an exisitng render, with good suction, The surface has been repaired and the purpose of the Trolean is to cover up some of...

Ps the render is sound, no blown patches

Bump 95% of the paint is stripped off now. What's the best way to repair the cracks in the render? Before the tyrolean. I was thinking grind the deeper cracks out, apply sbr slurry and make them good with sand and cement possibly with a fibre additive. Or perhaps add a stainless mesh to the...

Here's some photos

What would be the most effective way to repair any cracks in the render prior to applying the Tyrolean? thanks

Thanks for your reply

Hello Forum; Iam new here I'am in the process of prepping the frount of a house for tyrolean, and have a question or two. There is patchy masonary paint on the render, some of it is well adhered some not; about 20% can be scraped off. I'am removing the rest with a paint stripper, which is...