Rigsby's latest activity

Members online

  • Rigsby
    Rigsby replied to the thread Monochue drying time.
    Is it Johnstones by any chance?
  • Rigsby
    Rigsby replied to the thread Pebbledash to smooth finish.
    Quite right but I didn’t look at the photo close up, more on what I read. Yes on painted dash then parinter or Fassa K over. Subject to...
  • Rigsby
    Rigsby reacted to Runswithscissors's post in the thread Versapanel cement Board with Useful Useful.
    That product is an MGO based board... not allowed on new build insurance covered projects anymore!! let me know if you want some...
  • Rigsby
    Rigsby replied to the thread Some good news.
    Well done and get your van stickers. Put it on your web site and stationary too.
  • Rigsby
    Rigsby reacted to tapit's post in the thread Advice needed please with Like Like.
    I will need to consult with my render Guru @Rigsby
  • Rigsby
    Rigsby replied to the thread Advice needed please.
    Johnstones is fine, using it a lot alately. What is the repair? Whats wrong with it? Repair or repoint? Repoint is not needed and all...
  • Rigsby
    Rigsby replied to the thread Patching terylene..
    Getting it to match will not only need the same wetness but the wear on the tyroleaning machine, so down to a bit of experimentation...
  • Rigsby
    Rigsby reacted to Cockney1's post in the thread Rendering on timber/ EML with Like Like.
  • Rigsby
    Rigsby reacted to Cockney1's post in the thread Rendering on timber/ EML with Like Like.
  • Rigsby
    Rigsby replied to the thread Rendering on timber/ EML.
    The chippies have done it the way it used to be done 15+ years ago. It can work with the right mix and practice which it sounds like...
  • Rigsby
    Rigsby replied to the thread Ghosting or something else.
    There are some Council houses near me and when it rains heavy you can see the blocks showing through. No idea how thick but they was...
  • Rigsby
    Rigsby replied to the thread Ghosting or something else.
    Do you know what thickness the render is? You may find a horizontal Stop bead That will be either 10 or 15mm.
  • Rigsby
    Rigsby replied to the thread Ghosting or something else.
    There are several causes on one coat render. Different blocks, wet blocks, different suction in the substrate will give different...
  • Rigsby
    Rigsby reacted to paulf's post in the thread Wet dash with Funny Funny.
    10 pints of carling and a vindaloo.
  • Rigsby
    Rigsby replied to the thread Horizontal crack.
    or an extension on top of a garage? Fit brick stitch bars into it zig zag and double mesh with a thin coat system.
  • Rigsby
    Rigsby reacted to John j's post in the thread Horizontal crack with Funny Funny.
    Floor line can only mean one thing . Fat bastards
  • Rigsby
    Rigsby reacted to zombie's post in the thread Horizontal crack with Funny Funny.
    Run a sky cable along it and pretend its nit there
  • Rigsby
    Rigsby replied to the thread Cracks on scratch coat?.
    Yes leave it 6 weeks but do not use that clear stuff it’s water repellent but it doesn’t know the difference between wet water and wet...
  • Rigsby
    Rigsby replied to the thread Cracks on scratch coat?.
    You have left it to cure so it will be fine. Are you going to paint it? Jub make a siliconed paint that has some stretch in it or...
  • Rigsby
    Rigsby replied to the thread Silicon thin coat render advise.
    It’s all down to timing. Spray the first coat and if it stiffens up enough then spray the second. I scratch the first pass if it going...
  • Rigsby
    Rigsby replied to the thread Silicon thin coat render advise.
    X32 is sticky on its own but you could use Eco rends liquid primer instead of rendaid. I have used their primer to stabilise a wall of...
  • Rigsby
    Rigsby replied to the thread Cracks on scratch coat?.
    Thats shrinkage cracks. Either too much suction or the heat. Tap it and if it isn’t hollowthen let it fully cure for at least 14 days...
  • Rigsby
    Rigsby replied to the thread Cracks on scratch coat?.
    under the metal meshing was it brick or block with suction or did he treat it with anything? Are the cracks small and more horizontal...
  • Rigsby
    Rigsby replied to the thread Cracks on scratch coat?.
    If it appears to be solid then crack on. The cold will be ok, safer than too hot and the damp air will help curing. even painting will...
  • Rigsby
    Rigsby replied to the thread Rendering window reveals.
    Bit unusual that ts, scaffolders price for erection and dismantle over a set or agreed time then in my case 5% of the price per week on...
  • Rigsby
    Rigsby replied to the thread wood effect plaster rsj joist.
    Find an Atlas Avail merchant, they have probably had a training day and may know of someone.
  • Rigsby
    Rigsby replied to the thread Flushing ritmo.
    Thats a dosser.
  • Rigsby
    Rigsby replied to the thread Flushing ritmo.
    The Doser? Yes.
  • Rigsby
    Rigsby replied to the thread Flushing ritmo.
    The doser is good and it will give you peace of mind. My Ritmo and water pump needed expensive repairs after using Wickes and not...
  • Rigsby
    Rigsby replied to the thread Pitched Face Render Circa 1900s.
    Stone effect.
Top