Recent content by Joey_c

Hi mate , I personally think 15mm is a bit much for one pass plus it's closer to 20mm by the time your beads are plumbed down the building and your leaving proud for scraping back , I've been doing a thinner pass adding mesh in and ruling with serrated Edge, doesn't matter if the first pass...

Not particularly mate, fairly sheltered area as well

Really strange mate , same temp as me same background also same colour fassa but I finished spraying closer to 3pm and was super hard by 7am , not sure how how much water your using per 25kg bag as I set it differently on the putzmeister I just set how many litres I want it to pour in the...

How much water you using per bag mate ? Seems pretty wet coming through, I have to open it up with scratch float before the I bar as its just screeching on top its that hard , do you damp walls down at all ? I'm worried of blocks ghosting through so straight on dry walls

Hi , the machine is a putzmeister sp25 dqr, we have gone with 5.5liters to one 25kg bag seems pretty wet as previously I've only hand applied and would have it thicker but it definitely gives me more working time than when we first started at 5 litres also was having an issue of the mix drying...

Hi guys , I've recently started spraying monocouche (fassacouche) and I'm having an issue with airpockets , I'm new to machine rendering but have hand applied for years , I pass the whole end around 6-7 mm then use serrated edge to flatten then back up spray around 10mm pass with someone...

Just had a big ceiling fail with this s**t !! Grit is completely adhered to the artex but the Skim has come away clean , how the f**k is this sold as a bonding agent ,never had a fail with bluegrit, spoke to a couple of spreads I know both had ceilings and walls fail on green