Why not spray domestic

Members online

Setup each day 10 mins, clean out 10 mins.

You will learn time saving tricks as u go. Clean using the r/s to push water through save f**k**g about with tap and u can clean the hopper as well.

If the flow of the plaster stops and starts like it has air in it then it because u are using the powercoat shaft. ( silver no up right arm) switch to the ritmo m render and it's sweet

Use the water pump. It can go direct on to the tap as well as a water butt.

If keep f**k**g it up just use it as a conveying machine. Even my dad can do that.


Water flow 100 speed 10

You can leave the build up in the chamber just spray out any wet stuff. This lets you not have to disassemble the mixing zone each hit. Just do it each day after final hit.
Thanks , I read on spray plaster bag it says if not spraying for 15 minutes just spray for 45 seconds to a minute then carry on as normal, would you say that's cool to do I.e I could just keep going then when all done stop and clean out when all gear is on ?
 
Water 100

Speed 10 is that for kanuf or BG spray finish
WP_20160729_11_52_48_Pro.jpg
 
Thanks , I read on spray plaster bag it says if not spraying for 15 minutes just spray for 45 seconds to a minute then carry on as normal, would you say that's cool to do I.e I could just keep going then when all done stop and clean out when all gear is on ?
Can leave it longer but remember the first bit u spray will go off slightly quicker then the fresh stuff
 
Speed ten for everything. I'm sure both were water flow at 100 but if thistle is to wet try 80 as that's also in the back of my head. Sorry it's been a while since I sprayed BG
 
It will take 6 months
Found another block yesterday it's in main air pipe that connects air to lance/gun will have to order new air hose with the fitting as whacked it to bits last night in anger,thanks for advice
 
Did it break lol
Broke the ring on the inside,f**k it I phone up for one tomorrow,just unplugged the connection about a metre down the air pipe,connected it to gun and air was going through it fine hopefully last piece to sort then rolling again r/s and gun sorted tested it tonight with water in hopper all good,thanks for your help pft should give you a job
 
I hope it works out for you
The honest truth is getting a machine for small skimming jobs is pointless
The main man currier has been spraying internal for years and knows his stuff
Big areas then maybe



Sent from my iPhone using Tapatalk
 
Broke the ring on the inside,f**k it I phone up for one tomorrow,just unplugged the connection about a metre down the air pipe,connected it to gun and air was going through it fine hopefully last piece to sort then rolling again r/s and gun sorted tested it tonight with water in hopper all good,thanks for your help pft should give you a job
Have you actually sprayed anything yet?
 
Broke the ring on the inside,f**k it I phone up for one tomorrow,just unplugged the connection about a metre down the air pipe,connected it to gun and air was going through it fine hopefully last piece to sort then rolling again r/s and gun sorted tested it tonight with water in hopper all good,thanks for your help pft should give you a job
I thought it's a no-no to test it with water, but what do I know, only machine I own is an electric toothbrush

Sent from my Nexus 6P using Tapatalk
 
Could be you I suppose it's photoshopped and they got rid of your ginger hair, good move for BG :) no really have you sprayed anything? I know you've blocked a few pipes that's it :)
This one was all set ready to go but had blocked pipe on this week and hand balled it on instead, builder has a few more on the go,shame it did block but we will get there .. Even if I die trying
WP_20160905_14_36_51_Pro.jpg
WP_20160905_11_19_57_Pro.jpg
 
Tall dark and handsome . . We all have stupid days I guess.. You reveal a pic il go next.
Ye the names a gimmick alright!
You always kind have an image of someone from how they speak and come across but ive got a feeling it would be not what I was thinking
 
Tall dark and handsome . . We all have stupid days I guess.. You reveal a pic il go next.
Ye the names a gimmick alright!
You always kind have an image of someone from how they speak and come across but ive got a feeling it would be not what I was thinking
Best keep me just as a fantasy don't want to spoil it xx
 
Plasterman work out why you keep getting blockages!!
Set up the machine over a weekend and run a few bags through it to get you going
It'll take a while to get used to it with problems galore!!
I haven't used mine for skimming although I imagine there to be more issues than using it for rendering
Using the thistle spray finish by hand must be costing you money!![emoji107]


Sent from my iPhone using Tapatalk
 
How is that spray finish to apply by hand vince?

Do you use it like multi? price?
Mate hand on heart even if the spraying didn't work out for me after a year I would probably still hand apply this gear.it's so smooth and clean,trowels up great,can get finish one coat on good back grounds it's £8 bag inc vat
 
Plasterman work out why you keep getting blockages!!
Set up the machine over a weekend and run a few bags through it to get you going
It'll take a while to get used to it with problems galore!!
I haven't used mine for skimming although I imagine there to be more issues than using it for rendering
Using the thistle spray finish by hand must be costing you money!![emoji107]


Sent from my iPhone using Tapatalk
Worked out I turned air off and shouldn't of done completely block up all the air pipe on the gun 6mm and the air on and off knob and it even went in the main air hose which attaches to the gun,I'll never do that again for sure.totally cleaned everything,the whole machine and every part on it now.
WP_20160904_19_45_28_Pro.jpg
 
Top