Rotor stator 6.3. Cheap and good

Members online

plasterjfe

Private Member
Been using a rotor stator from lord and downing. Its an after market version, their own brand.
I have been counting up to compare.

15.2 tonnes so far 8 tonnes of that being weber chalk wich wears rotor stators hard.
So a tad over 15 pallets and still running.
20m hose running average 20 - 24 nar back pressure.

Just ordered 2 more. Tidy.
 
Tried it with the pft silicone spray too. Thats nice gear pure silicone. You can use it to keep your gimp suit supple
 
Does this not go against their whole sales principle? 'Original or Official PFT'

We have 2 versions of D,6.3 Rotor and Stators the P1 and the Twingo. Both on average are getting over 14 pallets per R/S. And they cost roughly £65 + VAT
Happy to send you one down to try John
 
Does this not go against their whole sales principle? 'Original or Official PFT'

We have 2 versions of D,6.3 Rotor and Stators the P1 and the Twingo. Both on average are getting over 14 pallets per R/S. And they cost roughly £65 + VAT
Happy to send you one down to try John


Chill Winston
 
Been using a rotor stator from lord and downing. Its an after market version, their own brand.
I have been counting up to compare.

15.2 tonnes so far 8 tonnes of that being weber chalk wich wears rotor stators hard.
So a tad over 15 pallets and still running.
20m hose running average 20 - 24 nar back pressure.

Just ordered 2 more. Tidy.
Can you give me wedsite to find out more about these thanks davie
 
Sorry only just seen the updates. From memory i think it was about 49 quid plus vat for a rotor and stator.

Happy to try/test any to see.

They are made by pft from what i know like another range option but dont quote me on that

Final count not in yet
 
Sorry only just seen the updates. From memory i think it was about 49 quid plus vat for a rotor and stator.

Happy to try/test any to see.

They are made by pft from what i know like another range option but dont quote me on that

Final count not in yet
That's a good price
 
Dod u get any of these @David stewart
We had 19 tonnes in the end before we swapped it. It had slowed down and the water setring was dropping so we lashed it. Not bad for under 50 pund
 
Does this not go against their whole sales principle? 'Original or Official PFT'

We have 2 versions of D,6.3 Rotor and Stators the P1 and the Twingo. Both on average are getting over 14 pallets per R/S. And they cost roughly £65 + VAT
Happy to send you one down to try John
Reqularly achieve 26 pallets with the one stop r&s and I'm guaranteed to get it next day .. Never been let down by them even stayed open late on a Saturday just so I could collect urgent parts after being let down by other so called dealers
 
No not yet contracter working for suppleies mine but will.in the future
Reqularly achieve 26 pallets with the one stop r&s and I'm guaranteed to get it next day .. Never been let down by them even stayed open late on a Saturday just so I could collect urgent parts after being let down by other so called dealers
What you spraying ice cream lol
 
Top