british gypsum spray day

Status
Not open for further replies.

plasticfantastic

New Member
Well after 2 failed attempts to get on the day with out work taking over my life i finally got on this one!
Its well worth a day out down the BG training center The guys was wicked Joe is a top guy and after us brain storming as to how to clear the pipe :RpS_cursing: 15min set up time more like 1 hour no purge kit tried compressor and straight on the mains roding and driving over the hose got it cleared in the end :flapper::flapper:
After after that little hick-up it all went sweat as a nut.
Even down to the lunch they provided for us A++++ ((WELL DONE))

Im going to get my butt raped saying this but I think they need to bring out the spray gear like muilti and board finish if it was that readily available id choose it over muilti/board any day:RpS_thumbsup: it really is sexyness in a bag when it comes to plastering.
Im not bias but the guys that have used it or are using it youll know what im talking about.

Id really just like to take this time to say A really big big thanks to Joe you really opened my eyes as to all aspects of the trade from the set up strip down spraying and of course the flattening in and troweling up.
iv added some picks of the day just to show guys what there missing

IMG_1586_zps84cd8011.jpg

IMG_1595_zps3b41e056.jpg

IMG_1590_zps5bbb0501.jpg

IMG_1589_zps16e78e1b.jpg

IMG_1607_zps021476e7.jpg

IMG_1606_zps2b8c0eb3.jpg

IMG_1608_zpsfa59661e.jpg

IMG_1609_zps9c581045.jpg

IMG_1610_zps41bb2720.jpg

IMG_1619_zps63580347.jpg

IMG_1621_zps9cdf6e62.jpg
 
Last edited:
Its very good gear but total pointless when you have to pre order up to 2-3 weeks before a project starts.Joe is a top man though :RpS_thumbsup:
 
Have u found out how much you can get it for? It does make multi and board feel like mud dont it!
 
im just out side of chatham I was told its about the same price as muilti there's no grain nothing its like baking flower.
dont know what its like whisked up then off the stop is it the same as muilti and board then builder bucket of water for full bag mix
just mix it like finish how you like it?? or wet then let it pick up first????
 
no but i know your not getting less then £3 per bag. with vat
even big firms like higgens redrow ect cant get it that cheap even by the lorry load no i know your talking pony
 
a guy i work with has one im trying to push him into using his powercoat for finish
Im from gillingham if you ever wanna see one being used on site. Who u work with? Im on the look out for internal sprayers for some of the bigger stuff we have in the pipe line
 
Status
Not open for further replies.
Top