Eze 24

Members online

Status
Not open for further replies.
Thats good to hear Nick, I have spoken to Ryan this week and planning to pop up after our holiday for a demo.

Can you elaborate on the awesome ! bit ??
 
Last edited:
I've trialed this machine over the last few days and have been quite impressed.

For a small machine, it certainly punches above its weight.

Thin coat bucket renders are a dream, minimal overspray, as compared to M100, with render application made so easy and accurate with the design of the gun, which has immediate cut off, so no afterspray mess. Fully adjustable air on the machine so you can set the delivery to the wall to your own preference, which is a bonus.

It is light weight and compact(45kg when empty) so can be wheeled around scaffold easily, though we will be investing in 8m of additional hose to minimize this.

I've put HP12, Heck K&A,CPI GP, granol ThermG, and HPX, through it with no problem, so other backing coats I would imagine would be fine.The delivery with the supplied red standard R&S for these is not that bad, compared with the M300, using Blue R&S. I was expecting it to be quite poor to be honest, but I was more than happy with the rate of output. Speaking with Ryan, there will be other R&s available to increase output, i think.

Although its not a mixer this doesn't hold it back in my opinion, labourer knocks up and pours instead of bagging at the mixing pump. Ryan has promised me the prototype mixer attachment for this machine,so will report back on this in due course.

I have sprayed multi through this as well, though only 2 bags to date, once the air is set, it sprayed great. I haven't sprayed multi before so can't compare it to other machines, but it seemed to go ok.

Cleaning wise, with the ss hopper, and bottom drain valve, this takes just 10 mins max, we sat the machine in a plastic dashing tray,about 3'' high and this was enough to collect all waste products and leave the machine sparkling.

I've yet to put heavier renders through, but will report back when i can, though i have no doubt this will be ok.

All said, a tidy machine, very pleased with it.
 
Hey jasper good review.....any chance of some pics mate? What kw is it? Is there a PDF on it with all the details on it? How does it compare price wise to other machines you may have considered?
 
Hey jasper good review.....any chance of some pics mate? What kw is it? Is there a PDF on it with all the details on it? How does it compare price wise to other machines you may have considered?

Goody, pm me your email and I will send you the PDF Monday if you want. Pics and video on the website.


Ryan
 
as goody said what kind of money is? as where looking at getting a small machine for thin coats, and whats the usability compared to other similiar machines on the market.
 
as goody said what kind of money is? as where looking at getting a small machine for thin coats, and whats the usability compared to other similiar machines on the market.

Its £3599.00 + vat and the air compressor is £450.00 + vat.

It will spray upto a 4mm aggregate. Can organise a demo for you and send you a spec sheet if your interested? Just send me and email Ryan@pftcentral.co.uk and I will get the info to you Monday, or send me your number and I can give you a call today.

Ryan
 
when spraying a thin coat acrylic finish with the eze24, do you still need to rub up to finish??
 
Its £3599.00 + vat and the air compressor is £450.00 + vat.

It will spray upto a 4mm aggregate. Can organise a demo for you and send you a spec sheet if your interested? Just send me and email Ryan@pftcentral.co.uk and I will get the info to you Monday, or send me your number and I can give you a call today.

Ryan

i cant pm you my details, as i dont think you have enough posts.
 
does it spray mono or am i barking up the wrong tree? never used a machine before but toyed with the idea. doing a mono job all this week and would love to spray it on to save the old elbows...
 
does it spray mono or am i barking up the wrong tree? never used a machine before but toyed with the idea. doing a mono job all this week and would love to spray it on to save the old elbows...

Hi,

It will spraying mono. It's not going to be as fast as one of the 3 phase machines. But is still more than capable of doing it.
 
ritmo is 14ltm and does a bag of parex in 2 mins. 3 phase pft is 23-24ltm and does a bag in apporx 1 min. 1 bag generally covers 1-1.2m
 
Status
Not open for further replies.
Top