Weber pral m

Members online

S a plastering

Private Member
Got a bungalow too mono it has 3 bullseye windows don't think there is a bead for these can someone go through procedure for doing them thanks
 
Get a piece of ply and cut a circle out to the required size with a router. Do the reveal first and the front when reveals are hard. I pack the ply 10 to 12mm off the wall.
Cheers mate do you mean line the reveal with bendy ply say 12mm off the wall?
 
No, piece of ply with a round hole in it fixed to the front.
Ah right then pack it of the wall then won't the ply be in the way when I'm putting top coat on sorry bout this just trying to get my head round it never done one before assuming the rendaid is on first which I'm going to free hand
 
You take the ply off and work to the reveal when it's hard a day or 2 later. Rendaid on before the ply.
 
Just fill it in, then just cut it back to give a nice edge to work to. I pack out 10mm to give a bit of tolerance, I might scrape it back to 5mm if the reveal needs it to get the margin right.
 
Just fill it in, then just cut it back to give a nice edge to work to. I pack out 10mm to give a bit of tolerance, I might scrape it back to 5mm if the reveal needs it to get the margin right.
OK pal thanks for input just don't want ta look a dick in front of customer haha
 
Top