What PVA

  • Thread starter Deleted member 32554
  • Start date

Members online

D

Deleted member 32554

Guest
As far as I'm aware all the different PVA brands for plastering are the same , just different dilutions
( I know there's a waterproof version but discount this )
PVA is heavier than water
The thicker it is , the heavier it is
So if you measure a litre and weigh it you get a value per £ to compare different brands

Can anyone be arsed
 
As far as I'm aware all the different PVA brands for plastering are the same , just different dilutions
( I know there's a waterproof version but discount this )
PVA is heavier than water
The thicker it is , the heavier it is
So if you measure a litre and weigh it you get a value per £ to compare different brands

Can anyone be arsed

No...but
 
What about screen wash?
That was the subject of my next post
But don't like to encourage world pollution
Have never bought a bottle of bleach in my life , I'll let you guess how I clean the bog for my missus
 
As far as I'm aware all the different PVA brands for plastering are the same , just different dilutions
( I know there's a waterproof version but discount this )
PVA is heavier than water
The thicker it is , the heavier it is
So if you measure a litre and weigh it you get a value per £ to compare different brands

Can anyone be arsed
Wickes Pva ain’t the same as unibond Pva, no way
 
My college teacher told me PVA is PVA the only difference in brands is if it has been cut with something or not
 
Waterproof pva seals well and don't go tacky again when water or wet plaster is applied. Cost twice as much as plastering PVA.
Method
Dilute waterproof pva to instructions and allow to dry. Bang a cheap plastering pva over and skim is good practice imo.

Or SPR

One coat. Dries quickly especially with fan on blowing air.
Another coat and when tacky plaster.

SBR is a styrene rubber like product I think? Same as she durable emulsions

Thoughts?
 
Cheaper to sbr
Waterproof pva seals well and don't go tacky again when water or wet plaster is applied. Cost twice as much as plastering PVA.
Method
Dilute waterproof pva to instructions and allow to dry. Bang a cheap plastering pva over and skim is good practice imo.

Or SPR

One coat. Dries quickly especially with fan on blowing air.
Another coat and when tacky plaster.

SBR is a styrene rubber like product I think? Same as she durable emulsions

Thoughts?
Cheaper to SBR Then PVA and less products to stock
 
Everyone's missing the point
PVA is PVA
Different brand different dilutions
Price / weight / litre

The posh stuff diluted down to the same consistency

f**k it
I'll buy some Wickes , weight it and compare to posh stuff for you all lol
Can’t be the same then if they’re different dilution, as you put it!
 
This 1
 

Attachments

  • image.jpg
    image.jpg
    431.9 KB · Views: 163
As far as I'm aware all the different PVA brands for plastering are the same , just different dilutions
( I know there's a waterproof version but discount this )
PVA is heavier than water
The thicker it is , the heavier it is
So if you measure a litre and weigh it you get a value per £ to compare different brands

Can anyone be arsed
no I just suck the alcohol out of it
 
Your pulling my leg lol

How much do you pay
What ratio do you mix to make it the same thickoness as bnq or Wickes neat
[/QUOTE

nornally 18/20£
The cheap pva , the plaster separates, but I don’t get that on unibond
 
Top