My skimming

[JohnDoe]

My skimming looks dog rough at moment and dont know why.

 

[Gettingpeggedbyaragni]

If its fine painted i wudnt worry, your angles look tidy and it appears you give a s**t so i wudnt worry to much what it drys out like. Looks like its been superflexed imo but mmmmeah, everyone has those weeks where you wanna tear your hair out. Wudnt worry

 

[John j]

My skimming looks dog rough at moment and dont know why.

View attachment 44958View attachment 44959View attachment 44960View attachment 44961View attachment 44964

Trowel you useing

 

[hstoke]

It’s where we live mate https://www.stokesentinel.co.uk/new...toke-trent-crowned-most-congested-3841621.amp

 

[JohnDoe]

Trowel you useing

Mt carbon then midi

 

[John j]

Mt carbon then midi

Its the medi thats dragging it

 

[lurpak]

greasy skim

 

[megamix]

Look quite good actually. Are you secretly seeking praise lol

 

[JohnDoe]

greasy skim

The skim was wank mate. Didnt feel greasy felt dead like lol

 

[JohnDoe]

Look quite good actually. Are you secretly seeking praise lol

Nowhere near what it should look like mate

 

[John j]

The skim was wank mate. Didnt feel greasy felt dead like lol

Try wetting plaster up a bit sooner

 

[Colin 879]

Thought you said skimming ??

Why you posting pictures of the Sahara desert

 

[lurpak]

The skim was wank mate. Didnt feel greasy felt dead like lol

u using water on it when it still bit wet? Flat n smooth wouldn’t worry how it looks

 

[JohnDoe]

u using water on it when it still bit wet? Flat n smooth wouldn’t worry how it looks

Dont think I used any water but cant remember I was getting that pissed off with it.

 

[000]

Looks like your using the same mix 2nd coat & coupled with fookin about troweling up

Your welcome

 

[lurpak]

Dont think I used any water but cant remember I was getting that pissed off with it.

angles sharp n looks flat , wouldn’t worry. Took me a long time but finally stopped caring now aslong as paints up right. Some of
This is over board. Bonding/artex. Hardwall. Painted up perfect

 

[zombie]

@algeeman shall we tell him the secret way????

 

[algeeman]

@algeeman shall we tell him the secret way????

nope
it's for the gang only mate

 

[JohnDoe]

@algeeman shall we tell him the secret way????

It was 2 coat as you know already fresh gear laid down lolololol

 

[John j]

Dont think I used any water but cant remember I was getting that pissed off with it.

If in doubt .

Get plastic out

 

[algeeman]

Mt carbon then midi

check to see if your trowels have lost there shape john

 

[algeeman]

looks flat enough to me mate
your medi looks as if its lost its shape

 

[JohnDoe]

check to see if your trowels have lost there shape john

How long do your midi's last mate?

 

[JohnDoe]

If in doubt .View attachment 44969
Get plastic outView attachment 44970

I did on another wall and it scratched it to f**k hahahaha

Forgot the plastic was scratched to shite

 

[JohnDoe]

angles sharp n looks flat , wouldn’t worry. Took me a long time but finally stopped caring now aslong as paints up right. Some of
This is over board. Bonding/artex. Hardwall. Painted up perfect

Tidy enough mate

 

[algeeman]

How long do your midi's last mate?

I'm using 3 trowels on a set at the minute
1 for coating
1 for trowling
and a brand new 1 to cross trowels with
f**k**g headache sometimes when they looses shape

waiting on a 22" should of arrived beginning of the week
go back to using 2 again then.

it's running them up and down beads for me why they loose there shape
checked the bend on the trowel its exactly where
it's running up and down reveals

 

[John j]

I'm using 3 trowels on a set at the minute
1 for coating
1 for trowling
and a brand new 1 to cross trowels with
f**k**g headache sometimes when they looses shape

waiting on a 22" should of arrived beginning of the week
go back to using 2 again then.

it's running them up and down beads for me why they loose there shape
checked the bend on the trowel its exactly where
it's running up and down reveals

Coronavirus will have killed ye before that trowel turns up.

 

[Rossi46]

nope
it's for the gang only mate

 

[algeeman]

Coronavirus will have killed ye before that trowel turns up.

I hope so mate lol

 

[John j]

I hope so mate lol

Can i have trowel.



Think its got @Vincey He.s disappeared. Might be in bunker

 

[zombie]

It was 2 coat as you know already fresh gear laid down lolololol

2 coats for girls if on boardwork

 

[Rossi46]

I’m going back into production. Rossiflex was perfection. Although I reckon I could attach a horseshoe to a trowel handle and plasterers would buy it.

 

[JohnDoe]

I'm using 3 trowels on a set at the minute
1 for coating
1 for trowling
and a brand new 1 to cross trowels with
f**k**g headache sometimes when they looses shape

waiting on a 22" should of arrived beginning of the week
go back to using 2 again then.

it's running them up and down beads for me why they loose there shape
checked the bend on the trowel its exactly where
it's running up and down reveals

Will see if it's the midi out of shape Monday as got a brand new one in garage. So will get it out for Mondays skim. I ordered 2 in November. Should last longer than 3 or 4 months??

 

[John j]

I’m going back into production. Rossiflex was perfection. Although I reckon I could attach a horseshoe to a trowel handle and plasterers would buy it.

How much . Might dip in to my ebike fund

 

[choppa]

angles sharp n looks flat , wouldn’t worry. Took me a long time but finally stopped caring now aslong as paints up right. Some of
This is over board. Bonding/artex. Hardwall. Painted up perfect

View attachment 44966View attachment 44967View attachment 44968

s**t