Hardwall through a Ritmo problems?

Members online

Rigsby

TPF Special Forces
Asking for a friend....


He has a hardwall job and got the lightweight shaft off Les. Anyways, he has rung me to say it starts off ok but after a bag or two it then just is mostly water?

Anyone put Hardwall through a Ritmo?
 
Asking for a friend....


He has a hardwall job and got the lightweight shaft off Les. Anyways, he has rung me to say it starts off ok but after a bag or two it then just is mostly water?

Anyone put Hardwall through a Ritmo?
I honestly don't believe it!
Yes, yes we've put Hardwall through our Ritmo twice.
We just have a standard shaft, the first time we had a mare (almost certainly user error), but the next time we had a clampable r+s and the gear was flying on lovely. Dan had to slow down spraying because I couldn't keep up ruling.
 
I honestly don't believe it!
Yes, yes we've put Hardwall through our Ritmo twice.
We just have a standard shaft, the first time we had a mare (almost certainly user error), but the next time we had a clampable r+s and the gear was flying on lovely. Dan had to slow down spraying because I couldn't keep up ruling.

Not sure but I think he also fitted a clampable r&s? I will ask tonight. But there is a chance he has set that up wrong.
 
@theclemo is that 350-380 running or set up?
He has a new clampable on but he has not checked it. I wouldn’t be surprised if he has tightened the bolts up. His water was about 280, lightweight new shaft.

Turned to water after 1-2 bags.
 
@theclemo is that 350-380 running or set up?
He has a new clampable on but he has not checked it. I wouldn’t be surprised if he has tightened the bolts up. His water was about 280, lightweight new shaft.

Turned to water after 1-2 bags.
Strat running at 380 he can take it down a bit if it's to wet. It takes a good bit of water mixing the hardwall compared to render.
 
Pft Wales and ramboo tools lol. The machine was half plugged in. Me f**k**g about for half hour trying everything possible. Trid the mains power gen power. Different electric cables. Then ramboo tools said is the machine plugged in lol I looked at the motor plug it was only half way in. How we f**k**g laughed.
Done that with my monojet mate, it is funny
 
I did that too lol.
last Year plugged the machine in and red button stayed on and then kept clicking off, I tried this a few times but couldn’t work it out?
I thought it was tripping out but realised the labourer had been tugging at cables When unplugging And made live wire loose.
next bit makes me shake every time I think of it!!
stressed out and needing to get on I didn’t have any wire strippers close so thought I’d just bite the rubber off like you do and put wire back in to slot.
only trouble was it was still plugged in at the other end!!!
i was about one inch away when I realised!!
 
Top