Any Ritmo for sale

Members online

Total: 176 (members: 6, guests: 170)

Share this page

Plasterers1StopShop said:
It’s been proved mate, please bare in mind we used to sell the Ritmo, we also sell many other types of machines.

We have over 30 years experience in it and know what we are doing - we have got to where we are for a reason
Click to expand...
Then must be me mate ! All that negative energy from this f**k**g forum is affecting my judgment and working abilities!
Regards
the great uncle bulgaria!
 
vfr12 said:
Then must be me mate ! All that negative energy from this f**k**g forum is affecting my judgment and working abilities!
Regards from the great uncle bulgaria!
Click to expand...

I quite honestly am lost with your comments. There is very little negativity apart from some who continue to create it.

We have many positive machines reviews on all platforms, would be nice for you to see these and realise the quality of our machines.

There will always be guys who don’t like us or them, that will happen and is life.
 
Too be fair the m200 when working was good enough. It was the bridging issues i had, but apparently new mixing shaft sorted it.

Pft wouldnt want a 230v m200 coming out, would be a very good machine..
 
vfr12 said:
Ill be furious if you sold me 110 and few months later you ask me to come down your yard to test the 230! There will be lots of 110 coming up for sale then .
Click to expand...

Why would you be? You can’t use 240v on major building sites! Another draw back is you won’t be able to use the thin coat kit for it as standard as it has a built in compressor, you’ll need an additional one causing more expense

Would you have been furious if you brought the Ritmo then the brought the Plus, then the Turbo out?

Guys buy 110v for the right reasons. I know of plenty of guys who couldn’t use their 240v machines on site and had to sell.
 
Plasterers1StopShop said:
Why would you be? You can’t use 240v on major building sites! Another draw back is you won’t be able to use the thin coat kit for it as standard as it has a built in compressor, you’ll need an additional one causing more expense

Would you have been furious if you brought the Ritmo then the brought the Plus, then the Turbo out?

Guys buy 110v for the right reasons. I know of plenty of guys who couldn’t use their 240v machines on site and had to sell.
Click to expand...
I have the feeling the only m200 users in the country will be the firefighters , pumping water to fill the cisterns.
 
vfr12 said:
Well, that’s the plan or anything that doesn’t suit you will be deleted! That’s called the Ryan style! You are not man enough to take it on the chin , then I’ll go around! I have no problems!
Click to expand...

I’m not the one hiding behind a fake name giving someone grief on an online forum... very manly!

What is your actual point? What are you trying to prove or cause?

I am lost with all of your constant negativity! For someone who hasn’t even met me, you cast a very large opinion. You are the one who clearly has a problem, it’s an endless bombardment
 
Plasterers1StopShop said:
I’m not the one hiding behind a fake name giving someone grief on an online forum... very manly!

What is your actual point? What are you trying to prove or cause?

I am lost with all of your constant negativity! For someone who hasn’t even met me, you cast a very large opinion. You are the one who clearly has a problem, it’s an endless bombardment
Click to expand...
Put up the post you deleted! Why making me typing it again?
 
J
vfr12 said:
Well, that’s the plan or anything that doesn’t suit you will be deleted! That’s called the Ryan style! You are not man enough to take it on the chin , then I’ll go around! I have no problems!
Click to expand...

When I comment back or give an educated answer, you come back with insults. You mention me personally and try to create a bad image or name for me.

If you want to discuss things with me, please feel free, but don’t start getting personal.

You know where my depot is if you would like to meet up with me an discuss things and meet me in person. This isn’t me acting tough, it’s me saying meet me, then cast your opinion. Knowing someone through a forum isn’t knowing a person!
 
vfr12 said:
Put up the post you deleted! Why making me typing it again?
Click to expand...

I can’t delete anything on this forum. What gives me the right to do it. What gives you the right to personally insult me and defame. What gives you the right to run down my business with absolutely zero knowledge on it.

You were right when you said the negativity on this forum is a lot. I would take a close look at the reason why!
 
Plasterers1StopShop said:
I’m not the one hiding behind a fake name giving someone grief on an online forum... very manly!

What is your actual point? What are you trying to prove or cause?

I am lost with all of your constant negativity! For someone who hasn’t even met me, you cast a very large opinion. You are the one who clearly has a problem, it’s an endless bombardment
Click to expand...
A little bit of banter is an occupational hazard for us spreads but I've come on here to give advice and get advice, there's more bitching goes on than than my 13-year-old daughter's Instagram account,
 
Tom81 said:
A little bit of banter is an occupational hazard for us spreads but I've come on here to give advice and get advice, there's more bitching goes on than than my 13-year-old daughter's Instagram account,
Click to expand...

It’s a sad thing it happens. Internet moaning or bitching seems a common thing

The forum is a great place for advice and help. Hopefully the bitchiness dies off
 
Plasterers1StopShop said:
For someone who hasn’t even met me, you cast a very large opinion.
Click to expand...

It’s hard to believe your black magic is not working on every one! I do cast opinions, but they are based on my experience!
Both made out of tin , especially the mixer! It’s beyond me how can you sell anything like this to people , and telling them tales how to work and why is better to have mixer and machine separate, although both , can’t be classed as such .

51CA86E0-BA2B-4CDB-820E-C09D35382616.jpeg
 
vfr12 said:
It’s hard to believe your black magic is not working on every one! I do cast opinions, but they are based on my experience!
Both made out of tin , especially the mixer! It’s beyond me how can you sell anything like this to people , and telling them tales how to work and why is better to have mixer and machine separate, although both , can’t be classed as such .

View attachment 39054
Click to expand...

Who are you then?

So you slate the M200 with no experience? What is wrong with either of the above machines. EZE 24 is still the best machine on the market for thin coat render

This, at the time was a great setup for EWI work and sold well. EZE Mix for adhesive and for basecoats.

EZE 24 for thin coat with the ability to spray base-coats

I have not had a complaint about this setup so I’m concerned as to why it’s taken so long for you to raise one? As you have seen over the years, we are well known for our customer service and if you have an issue, we work to fix it
 
Plasterers1StopShop said:
Who are you then?

So you slate the M200 with no experience? What is wrong with either of the above machines. EZE 24 is still the best machine on the market for thin coat render

This, at the time was a great setup for EWI work and sold well. EZE Mix for adhesive and for basecoats.

EZE 24 for thin coat with the ability to spray base-coats

I have not had a complaint about this setup so I’m concerned as to why it’s taken so long for you to raise one? As you have seen over the years, we are well known for our customer service and if you have an issue, we work to fix it
Click to expand...
He's just gutted he didn't buy a ritmo and taking it out on you
 
Plasterers1StopShop said:
You can spray at the same consistency as the Ritmo, when we say raise your water it’s due to people spraying too stiff causing excessive pressure

A huge mistake people make is a lack of water in their render. Causing cracking, colour differences and many other issues
Click to expand...
can a variance in amount of water really cause colour difference?
 
BigBish said:
More water than recommended adds about 2 or three hours to each day. W



Why would you spray that wet ?
Click to expand...
i wouldn't, i know nothing about machines but was just wondering why excess water would change the colour of render.
Do you guys dry mix bags first to get uniform colour?
 
tapit said:
i wouldn't, i know nothing about machines but was just wondering why excess water would change the colour of render.
Do you guys dry mix bags first to get uniform colour?
Click to expand...
Wetter the scratch darker the colour. Some folk try to cheat on a wet scratch, some things can’t be rushed through
 
You must log in or register to reply here.
Top