Best way to bodge this
- Thread starter John j
- Start date
John j
Mono Don
Don’t get this often , but you know what there like . Cheapest solution
choppa
Well-Known Member
Yep I no that’s why I don’t bother with them haha.
lurpak
Artex Boy
it will be fine aslong as loose bits off
John j
Mono Don
Bondging bit of cement
ChrispyUK
Well-Known Member
I wasn't referring to your methods mate.
lining paper an paint
D
Deleted member 29624
Guest
I'd be f**k*d if I was skimming that
John j
Mono Don
You know how these landlords roll. Didnt really want job but get on with bloke and another plasterer wanted some extra hol cash so i told him to come chuck it on with me
ChrispyUK
Well-Known Member
Don't slam the door on the way out!
D
Deleted member 29624
Guest
Sorry john but you shouldn't be skimming that...like chrispy said don't slam the doors on the way out....I couldn't give a shite if their a landlord they get told what work is needed and if they don't want it get someone else
Donzo never walk away from a fight ha ha ha
D
Deleted member 29624
Guest
Do you think he'll give a s**t it was a cheap bodge it falls off
John j
Mono Don
I.ll be gone n paid. To be far we got a steamer so if it looks like we can have it of in a hour we.ll strip it first . Dont think it will hang about long on that ceiling anyways
D
Deleted member 29624
Guest
Could board it in an hour
lurpak
Artex Boy
I don't see why that's an over board? You pussies scared to skim anything over than board.
Pva it then scrape. Pva again Tight bonding coat let pull in that won't go anywhere. 2 coats multi.
If you can't successfully skim that then stick to skimming
15 mins scrape vs 2 hour over board jr mad
Pva it then scrape. Pva again Tight bonding coat let pull in that won't go anywhere. 2 coats multi.
If you can't successfully skim that then stick to skimming
15 mins scrape vs 2 hour over board jr mad
D
Deleted member 29624
Guest
Lol how much work to your tactics PVA scrape PVA again bonding, it'll be boarded before your done trying to polish a turd
lurpak
Artex Boy
Here's one just done, had to level this n skim 10 meter long. The smaller room had been over boarded by last spread. I pulled it down to save over boarding the other 8 meters. Guess what was under it? Bit of artex .
Bonded out level to main room n skim lot perfectly flat . Never had one fall and all my works guaranteed
Bonded out level to main room n skim lot perfectly flat . Never had one fall and all my works guaranteed
Attachments
lurpak
Artex Boy
Pussy
lurpak
Artex Boy
End result is same. Much more work to over board and should only be a last resort i see it all the time skimmers want to board everything
God your F*****g clueless!!!
lurpak
Artex Boy
What because I don't think that needs over boarding?
D
Deleted member 29624
Guest
Your wrong
lurpak
Artex Boy
Well i must be if you and zombie say so..
D
Deleted member 29624
Guest
At the end of the day each to their own and everyone has their method but I wouldn't skim it and if cheap landlord wanted it skimmed I'd just say no and move on
lurpak
Artex Boy
All i see is a skimming ceiling that's being papered.
He basically wants to over board because he can't be arsed to remove paper. Fair enough.
Id quick dash pva as this will peel the paper off, pva again ready to go in 20 mins. You'd still be bringing the boards in.
Proper preparation is the key. You clueless fucks just overboard everything i see it constantly especially with artex.
I remember one ceiling i went to was treble boarded.
He basically wants to over board because he can't be arsed to remove paper. Fair enough.
Id quick dash pva as this will peel the paper off, pva again ready to go in 20 mins. You'd still be bringing the boards in.
Proper preparation is the key. You clueless fucks just overboard everything i see it constantly especially with artex.
I remember one ceiling i went to was treble boarded.
beader
Private Member
2hrs tops i would say.