Putzmeister M25

Members online

The flame

New Member
Hi
I'm new to the forum and this is my first post .

Anyone got any experience with the putzmeister M25 , how it compare the PFT and Mtec and can it spray multi finish .

Thanks
 
Hi
I'm new to the forum and this is my first post .

Anyone got any experience with the putzmeister M25 , how it compare the PFT and Mtec and can it spray multi finish .

Thanks
95% of the people on here use pft machines on here but nobody sprays multi. I spray mp finish as it's made to spray. I used to spray multi years ago but had a lot of problems spraying it tbh. Never had a problem with mp finish. Multi will spray but u can't put the gun down for a minute or two or it will block the gun or hose. Plus it's a c**t to clean out of the machine and gun.
 
95% of the people on here use pft machines on here but nobody sprays multi. I spray mp finish as it's made to spray. I used to spray multi years ago but had a lot of problems spraying it tbh. Never had a problem with mp finish. Multi will spray but u can't put the gun down for a minute or two or it will block the gun or hose. Plus it's a c**t to clean out of the machine and gun.

What machine u use for spraying mp finish? I'm getting bored of skimming houses by hand
 
95% of the people on here use pft machines on here but nobody sprays multi. I spray mp finish as it's made to spray. I used to spray multi years ago but had a lot of problems spraying it tbh. Never had a problem with mp finish. Multi will spray but u can't put the gun down for a minute or two or it will block the gun or hose. Plus it's a c**t to clean out of the machine and gun.
 
95% of the people on here use pft machines on here but nobody sprays multi. I spray mp finish as it's made to spray. I used to spray multi years ago but had a lot of problems spraying it tbh. Never had a problem with mp finish. Multi will spray but u can't put the gun down for a minute or two or it will block the gun or hose. Plus it's a c**t to clean out of the machine and gun.

The m100 will mate no problem at all.[emoji106]


Sent from my iPhone using Tapatalk
 
What machine u use for spraying mp finish? I'm getting bored of skimming houses by hand
I have the ritmo. I've only used it once for mp finish and was happy with it. I'll be spraying mp finish next week again with it. It just makes life a bit easier. Don't be thinking I have a machine and am going to blow houses out of it. U have to finish what you put on. It takes the machine 5 min to mix and put on a bag so about a board a minute it's only one coat. It' takes me 15 min to set the machine up. When one man is setting up the machine. Get the other man to mix up a bit of finish and coat around beads and reveals. That way u don't have to cover windows
 
What pft machine would you recommend for spraying monocouche ?
Thanks
Depends how much you are going to be doing. If you are on a building site I'd go for a diesel machine u f**k**g about just turn the key and off u go. @Plasterers1StopShop do them. I wouldn't be the best to advice u on 3 phase machines. I have a Ritmo l 240v good small machine can do all. Wouldn't be the fastest doing mono but not that slow either.
 
Depends how much you are going to be doing. If you are on a building site I'd go for a diesel machine u f**k**g about just turn the key and off u go. @Plasterers1StopShop do them. I wouldn't be the best to advice u on 3 phase machines. I have a Ritmo l 240v good small machine can do all. Wouldn't be the fastest doing mono but not that slow either.

Thing is, diesel machines cost mega £££,
I haven't got loadsamoney atm .
 
I have the ritmo. I've only used it once for mp finish and was happy with it. I'll be spraying mp finish next week again with it. It just makes life a bit easier. Don't be thinking I have a machine and am going to blow houses out of it. U have to finish what you put on. It takes the machine 5 min to mix and put on a bag so about a board a minute it's only one coat. It' takes me 15 min to set the machine up. When one man is setting up the machine. Get the other man to mix up a bit of finish and coat around beads and reveals. That way u don't have to cover windows

How long does it take to do a set with mp finish? And how many m2 are you doing with it? And how many men are finishing it?
 
Any idea what the m100 is like for spraying mono?

Think about it mate it's a 110v pump, Clemo has already said diesel or three phase for mono,I've never used a diesel i do have a three phase and it's great for mono I also have an eze for top coat and occasionally thin coat and I do a lot of thin coat with my 3 phase to if I'm only doing a small job and use the eze I can really tell the difference between the 3 phase with a slow rotor and stator and the eze whacked up to 10


Sent from my iPhone using Tapatalk
 
Think about it mate it's a 110v pump, Clemo has already said diesel or three phase for mono,I've never used a diesel i do have a three phase and it's great for mono I also have an eze for top coat and occasionally thin coat and I do a lot of thin coat with my 3 phase to if I'm only doing a small job and use the eze I can really tell the difference between the 3 phase with a slow rotor and stator and the eze whacked up to 10


Sent from my iPhone using Tapatalk
 
How long does it take to do a set with mp finish? And how many m2 are you doing with it? And how many men are finishing it?
To do a set this time of year 3 hours the last day i was using it. I did 15 m2 lol as it was just me testing the water setting on the ritmo for mp finish.
 
And how much does it cost per bag ?
I pay €8 a bag will do around 18m2 i pay €11 for irish gyproc skim. I can get multi for £5 but it is s**t so id rather pay €11 for irish gyproc skim. Kanuf mp finish is s**t on a reskrim but lovely on everything else
 
  • Like
Reactions: Mag
I pay €8 a bag will do around 18m2 i pay €11 for irish gyproc skim. I can get multi for £5 but it is s**t so id rather pay €11 for irish gyproc skim. Kanuf mp finish is s**t on a reskrim but lovely on everything else

I'm getting confused with all the € and £ , imagine what it's gonna be like after brexit lol
 
I'm getting confused with all the € and £ , imagine what it's gonna be like after brexit lol
Lol. Am in Ireland mate. Not far from the border to Northern Ireland that's where I can get my multi for £5 but haven't bought it in over a year as it's s**t
 
The flame.
It all depends on your type of work

Diesels sound great plug and play but to clean them out and store them you need big jobs and a lots of room. they r not for small gangs.
Diesels will pump further but unless u intend pumping over 50 mts away from the machine day in whats the point. they are good for liquid screeds but theres just no need for them IMO
3 phase electric pumps are like riding a bike. once you knoww how to do it.thats it.
These machines are suited to say gangs of 3 or more. they can be faster or slower depending what you need for the job just by changing the pump unit.
These bigger mixing pumps require big generators so bear in mind shifting that about job to job.
Then u have smaller machines. you can go 110v or 240.
These suit smaller gangs and can pump fast enough and far away enough for any type of job but not as far as a 3 phase obviously.
Pumping skim .you may here lots of different opinions . all i can say is over the years many have tried but it just doesnt take off. bear in mind its one thing getting stuff on the wall with a spray gun but finishing to a high standard and getting paid is a different thing only a plasterer can understand
 
The flame.
It all depends on your type of work

Diesels sound great plug and play but to clean them out and store them you need big jobs and a lots of room. they r not for small gangs.
Diesels will pump further but unless u intend pumping over 50 mts away from the machine day in whats the point. they are good for liquid screeds but theres just no need for them IMO
3 phase electric pumps are like riding a bike. once you knoww how to do it.thats it.
These machines are suited to say gangs of 3 or more. they can be faster or slower depending what you need for the job just by changing the pump unit.
These bigger mixing pumps require big generators so bear in mind shifting that about job to job.
Then u have smaller machines. you can go 110v or 240.
These suit smaller gangs and can pump fast enough and far away enough for any type of job but not as far as a 3 phase obviously.
Pumping skim .you may here lots of different opinions . all i can say is over the years many have tried but it just doesnt take off. bear in mind its one thing getting stuff on the wall with a spray gun but finishing to a high standard and getting paid is a different thing only a plasterer can understand

This plastering forum is f**k**g awesome !
Thanks for the advice mate
 
Why don't you go watch someone from here using one in the real world. The demo is not practical. Am sure there is someone from here that would let you come and jump in for a day.

Do you know anyone near cardiff who'd be up for it ? or would they be like f**k that I ain't showing him , he could steal work off me
 
Do you know anyone near cardiff who'd be up for it ? or would they be like f**k that I ain't showing him , he could steal work off me

Ring PFTwales Ian is a 100% he has helped me out and give me great advice. I bought my machine off ramboo tools in Northern Ireland the guy's a new PFT dealers there only at it about 2 years now. But if they boys where not sure of a problem I was having with material in the machine PFTwales was happy to help me as he is a plasterer himself and he knew the machines inside out.
 
Top