Texture with mono

[Scholefieldp]

got 200 metres of texturing to do with a heavy finish with parex gm ,got Sp11 ,ritmol l , and G4 ,was going to put a d43 rotor and stator in G4 to do it ,which machine would you use ,did one before with Sp11 but found it wasn't an even finish,bit shinee then dull ,any advice ,was told to use ritmol and put a tub of Feb in water barrel ,any one done this ,based out with sand and cenment and full mesh ,10 mm of gm the spattered cheers

 

[Rigsby]

I used the Ritmo ok.

You will need a slower r&s on the G4 3-4 I think?

 

[Scholefieldp]

I used the Ritmo ok.

You will need a slower r&s on the G4 3-4 I think?

What size cap did you use ,and did you slow down the machine when texturing thanks

 

[Rigsby]

Pm'd you.

 

[theclemo]

10mm cap speed 5 water 75 ritmo l

 

[Scholefieldp]

10mm cap speed 5 water 75 ritmo l

Thanks mate ,you ever put Feb in the water barrel?

 

[theclemo]

Thanks mate ,you ever put Feb in the water barrel?

No