1. Want to see how the new TPF works? Click here or you can drop me an email danny@plasterersforum.com
    Dismiss Notice
  2. The Plasterers Forum has now made it even easier to share photos and videos than ever before Click Here To Learn How
    Dismiss Notice
  3. TPF is the biggest plastering community and resource on internet... we are still growing.... we are nearly 10 years old so we are here for a long time yet...
    Dismiss Notice
  4. The Plasterers Forum is growing but we need your help to keep it growing.... Introduce yourself and say hello get involved... they dont bite :-)
    Dismiss Notice
  5. The Plasterers Forum is very busy!! ...25% up on last year!! Be a part of the biggest plastering community
    Dismiss Notice
  6. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
    Dismiss Notice

sharpshooter

Discussion in 'General Rendering Discussions' started by jacko001, Aug 12, 2017.

  1. jacko001

    jacko001 Member

  2. theclemo

    theclemo Private Member

    Can't see anything
     
    • Funny Funny x 1
  3. Nicm

    Nicm Well-Known Member

    Must be very fine work I can't see anything either.
     
    • Funny Funny x 1
  4. jacko001

    jacko001 Member

  5. rich1983

    rich1983 Member

    Ditto.

    Sent from my Nexus 6 using Tapatalk
     
  6. Arti

    Arti Private Member

    That how sharp the sharp shooter is. It's so sharp it can't be seen
     
    • Funny Funny x 1
  7. Olican

    Olican Private Member

    Squinting real hard here
     
    • Like Like x 1
  8. Danny

    Danny TPF OWNER

    nope nothing there
     
  9. FreeD

    FreeD Private Member

  10. jacko001

    jacko001 Member

    ile try again pissing me self .
     
  11. jacko001

    jacko001 Member

    Attached Files:

    • Like Like x 4
  12. Arti

    Arti Private Member

  13. jacko001

    jacko001 Member

    third nozzle from the smallest hole.to be honest they will all do a fine texture, depending on how much air pressure you set it to.
     
  14. Arti

    Arti Private Member

    What pressure you normally at
     
  15. jacko001

    jacko001 Member

    two and half bar .when the trigger is pressed. Set the adjustment nut half way..
     

Share This Page