How would you tackle this?

[Olican]

Been asked to produce a tyrolean finish on this Stirling board, be interested to hear your approach. If using S@C would you bother to felt and baton the head or would you just do the face. Would like to screw render board and use something like ocr but not many stockists locally so wouldn't justify a delivery.
I could drive to sas or encon [emoji106]

 

[S a plastering]

breathable roofing felt eml then sand and cement then tyro

 

[S a plastering]

you could do he cement board but never used OCR over that would it be a case of Rendaid an mesh then OCR

 

[Olican]

breathable roofing felt eml then sand and cement then tyro

Cheers bud, no need to baton then?

 

[S a plastering]

Cheers bud, no need to baton then?

for such a small area I wouldn't bother as long as the felt is on to help it breath

 

[HLR External Renders]

Use render board mesh it use Weber lac sponge it then use the lac at a Tyrolean

 

[Dansouthcoast84]

as hlr says or use a bucket coat coloured and spray

 

[Rossi46]

3mm bucket coat isn't too dissimilar from Tyrolean.

 

[S a plastering]

didn't realise you could flick lac on as tyro that's good to know

 

[Arti]

Why not just use tyro??