Hi i have been asked if im able to mono render this..
Just to tidy it up as its at a special needs school and want to make use off it. was thinking normal rendaid process and webber pral m in there dark grey.
Do ya reckon all would be ok.
Thanks in advance guys
Hi all.
Doing this massive barn conversion and they have board the walls and ceilings in 15mm blue boards 3m for the height.
They are sucking the shite out off the multi with no chance to flatten down or even get a decent hit inn.
Any body else had this problem/best way to over come i thought...
To fecking hot to skim in this weather me n my mate did a 5 bag set and felt like we was in a wet t-s**t competition,
Ball bag stuck to legs
Sent from my iPhone using Tapatalk
Alright fellow spreads
Any guys around Peterborough who are looking for some work
Tacking & dabing
Skimming.
If so drop us a pm as need some good spreads
Cheers
hi been sent over to a house that has been rebdered well tried to be..
Don't you just love it when people say they can render and it looks like its been ruled of with a banana so having to bond the walls out and start again.
Don't forget every body is a plasterer lol
Hi Guys
im having a few problems with my nela or multi atm
It keeps tiger striping like f**k atm
clean trowelling up water. yes
Clean trowel. yes
first coat layed on with mt
flatted with refina spat
new gear mixed up same as above
on closeing in trowel with mt
finish with nela
HELP
Cheers
Hi all
My mates machine what we used today took ages to get the gear on the walls & ceilings also found that the gear was starting to go off in hopper.
Deffo quicker by hawk and trowel any ideas how to over come this.
Was mixing 30lt a time sparying multi finish
Hi guys
Been to look at a job another plasterer has done patched a wall in about 700 wide 1m high
The wall was back to bare brick.
Customer said he hardwalled then skimmed it but that was 4 weeks ago.
The floor is timber with a cavity wall.
Was thinking of chopping off leaving for a week using...
alrite lads
just been on hand tools express and there knocking out refina buckets from 30lt to 110lt cheap as fcuk
so if your after any + plus thought id give ya heads up plus free postage happy days :bananahappy:
Alrite lads
Put a few walls on today and forgot about the small wall it was just left half troweled up.
Gonna reskim it tomorra.
Wots it like reskiming over still damp multi and the best way to tackle it.
Feel like a total nob but thats wot happens when u chase the
Hi guys
I have a room to re-skim..
The old plaster has just lifted off the old hard wall which is sound and well stuck all the old plaster has been removed.
Just wondering if there is anything else apart from pva, ing to help kill the suction.
Cheers lads
Hi guys.
Im all new to machines so go easymon me...
Im looking at investing in a machine mainly for finish on to board etc.
Are they quite easy to use and geto grips with?
Do you put a whole room on?
How many people to operate/finish the are.
Been looking at some off currier plastering vids...
Hi guys!
Im looking at getting a new mixing drill. Been looking at the mm22 for knocking up skimming as my colomixer is almost dead any feed bak and best place/price around would be great.
Was at builders merchant today and they had a stand with kraft trowels and tools, German made look quite smart.
Any off you lads got one or used one.
Cheers guys
Got my eze spat.
Dont rate it feels cheap and cheerful and the pole dont extend
Shud off got the excalibur looks a better spat.
So not to pleased with my eze :mad:
Hi guys how hard is it to tack lids with 9.5mm board with those board mates n e tips as my work mate broke his leg and im on ma jack :RpS_cursing:
N e advise or help tacking lids would be great:RpS_thumbsup:
Bloke who i work with well did!!!
All he did was moan, wouldent mix up put his spot and stand in the smallest room, spend more time cleaning his trowel and when he does do any plastering he puts these stupid skin tight white jeans on with a white shirt and he loafers :-0 Then the room he done...
Hi looking for a hand to plasterboard ceilings and jump on trowel.
Got a contact with local firm so could be quite frequent.
must drive have OWN tools can plasterboard and skim to a good standard work is around linconshire area.
If interested p.m me
Nick
Alrite fellow spreads any body near peterborough got owt work going.
Finding it hard to get any phoned all cantacts and all quiet.
Would be greatfull for any tip offs or a shout if you got anything.
Thsnks lads Smurth
Arite lads
hope you all good.
Just been sh*t on by a guy who i do a lot off work for. was finishing a job friday for him and he said monday go to next house got a phone call at 4 and said he got no money and no more work.:mad:
So if any of you lads have got any plastering work going or know...
take it its a common problem for us plasterers (tennis elbow) has any on got any tried and tested treatments cuz im sounding like a tube off smarties when i walk LoL so any feedback would be great
Hi all hope your all well.
Does any body use a speedskim.
If so could you tell me what you think just watched the vid on youtube and it looks like more work with sockets and cables everywhere.
Any info wud be great thanks:RpS_laugh:
Hi all me n me work partner put 2lids on smallish and 5 walls in the same flat all on in one hit.
after laying it in it would not pull in to get a 2nd hit on in time to finish before dark been using board finish on board work.
Any ideas how to get it pull in quicker. or is it a poo time off...
Hi im after some plastering work for to plasterers.
High standard off work cover as plastering and rendering wil travel.
Thanks for your time hope to hear from you.
Nick 07712886998
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.