Search results

  1. R

    Gyproc FibaTape Perfect Finish

    I never pay more than a couple quid for scrim!! Sent from my iPhone using Tapatalk
  2. R

    Forced-action pan-mixer: any advantage of 2.0kW over 1.1kW motor-power

    Yes mate it’s taken off in a big way down this way. The majority of work we are carrying out is the Sas prowall cladding system There’s a bit too it but it’s a good system through out Bit of a pain trying to get the silicone finished in the colder months but we get there in the end!! Sent from...
  3. R

    Forced-action pan-mixer: any advantage of 2.0kW over 1.1kW motor-power

    Good advice there zolco Sent from my iPhone using Tapatalk
  4. R

    Test yourself on damp identification (and help me out in the process!)

    I would get someone in to have a look not a internet damp plastering specialist!!! Sent from my iPhone using Tapatalk
  5. R

    Straight edge over scratch coat?

    What machine do you spray site mix with mate? Sent from my iPhone using Tapatalk
  6. R

    Render carrier board

    I like the gf but that gm is very gritty Probably good if your looking for a lime render look Sent from my iPhone using Tapatalk
  7. R

    Mono renders... what to do with the dust?

    Oh my lord Sent from my iPhone using Tapatalk
  8. R

    Apex Of timber loft to Render, Essex IG6

    You want a thin coat system on that Make sure the guy doing it knows what he’s doing!! Sent from my iPhone using Tapatalk
  9. R

    Parex drying a bit patchy

    Parex mono is a one coat material so no need for a scratch coat This wouldn’t help with drying out a even colour either I reckon Sent from my iPhone using Tapatalk
  10. R

    Render carrier board

    @Deri what did the finish come up like mate? The ehi is very course.is it being painted as I’ve rubbed and sponged up mono and it looks ok but needs painting as the colour isn’t great Cheers Sent from my iPhone using Tapatalk
  11. R

    Render carrier board

    Bloody hell thats some over order!! Sent from my iPhone using Tapatalk
  12. R

    Render carrier board

    Monorex is not a tender to go board I’ve used a polymer basecoat and sponged like sand cement Sent from my iPhone using Tapatalk
  13. R

    the machine

    Look at what type of work you undertake Domestic work-small electric machine Mono/3 phase Site work a diesel maybe Sent from my iPhone using Tapatalk
  14. R

    Mapewall gpr

    We did the other elevations with no problems I’ve used tons of different ocr brands now and I’ve found the finer aggregates,Weber/gpr do not like direct warm sunlight at all I’ve used parmurex/Sas float coat and fassa with no problems.the grit is bigger mind I was advised by a colleague of yours...
  15. R

    I section on krend

    If the ibar is screeching the next day it’s too hard Best to ibar before any scratch back Spray late rub back early or love juice and a early spray Sent from my iPhone using Tapatalk
  16. R

    Mapewall gpr

    Yes I phoned the guy and he had no real answer. To be honest it was warm and windy but still I must of had hundreds of cracks mate Sprayed at 15mm in 2 passes It’s too fine for my liking Sent from my iPhone using Tapatalk
  17. R

    Garage Wall Render

    What a load of tosh!! Stick to skimming Sent from my iPhone using Tapatalk
  18. R

    Should all buildings without cavity be lime plastered and rendered?

    I’ve been asleep for 3 months!![emoji106] Sent from my iPhone using Tapatalk
  19. R

    G4 for sale

    Where are you based mr render sw? Sent from my iPhone using Tapatalk
  20. R

    Garage Wall Render

    Dan the key issue is the light weight blocks mate What ever finish you go for the prep work is crucial as these blocks are not ideal for heavy renders I would use a microgobtis type primer then sand cement or ocr with mesh through out. Sent from my iPhone using Tapatalk
  21. R

    Finishing parex egi gf

    These are scratch renders so no poly float needed!! If it’s over eps basecoat then treat as standard mono mate Sent from my iPhone using Tapatalk
  22. R

    Krend ewi

    It’s a brave choice putting it straight over the eps but I suppose that’s what it’s made to do I personally wouldn’t use it I’ve used parex ehi over Maite and it’s decent I’d go for a thin coat system anyday due to the weight Sent from my iPhone using Tapatalk
  23. R

    Should all buildings without cavity be lime plastered and rendered?

    My point was and still is if the customer doesn’t want to pay to use a breathable render then it’s there choice!! I’m not going to worry about it at all I’ll advice as much as possible They own the house and its business for me my friend [emoji106] Sent from my iPhone using Tapatalk
  24. R

    Weber lac basecoat

    We do lot of thin coat now and we spray it on at around 5mm with a serrated edge used Mesh it and spat it flat Apply a 1mm lay down coat and spat to finish There’s tons of thin coat lads down my way now and not a straight edge/spat in sight This will look dog s**t when the sun pings across it...
  25. R

    Mapewall gpr

    That render hangs for yonks due to polymer Try a different render Other way would be to leave over night like mono I used that gpr mortar in the summer and had a thousand cracks the next day so haven’t used it since Sent from my iPhone using Tapatalk
Top