K rend mono pral m over painted render
- Thread starter Mag
- Start date
S a plastering
Private Member
It's a thin coat system with parinter, going over sand cement with parinter then another good 10 mm of top coat is nuts, it's to heavy, otherwise knock it off. sand cement scratch coat plus another coat of sand cement, you could have a good 20mm already then another coat of parinter then another coat of mono.
Last edited:
You don need to pin any parinter application it's a stand alone product regardless of thickness.
stuart23
Private Member
But again your relying on that paint carrying it for years to come, i'm doing mine in it and I'm pinning for safe measure.
Yep I agree your substate needs to be sound, but it's your job to determine if it's suitable or not, pinning it shouldnt come into it.
stuart23
Private Member
Belts and braces mate. Shouldn't have to but it won't harm it.
Orangemachineman
Well-Known Member
I've used a far bit of parinter and a thin coat finish
As owls says if the paint is sound no pins needed but that's down to the applicator i suppose
That parinter really is decent gear
Marshy
Private Member
What coverage do you get Rob are they 30kg bags like typical parex gear? Would you do 2 passes (mesh first then sponge finish the 2nd??)
S a plastering
Private Member
is it ok to put any bucket coat of a diff make over parinter my mate whos a spread has offerd me some cheap
Orangemachineman
Well-Known Member
Yes mate big bags.ive used it for a basecoat for 1.5mm finish and was getting 4-5m2 per bag
Yes 2 passes.its sponges up a treat
I've used it as a finish but wasn't really happy with the finish tbh
Marshy
Private Member
Cheers pal
