mono damp patches

J

Jackbracks

Member

• Feb 7, 2024

• #1

any seen this before?

Rubbed up friday, but has left wet marks…

chipped off the old mono, but kept the basecoat as it was solid.

Render primer’d old basecoat. Then basecoat & mesh. Then topcoat.

TIA

 

Attachments

• 
  IMG_9896.jpeg

  2.2 MB · Views: 69

Monkey Boy

Well-Known Member

• Feb 7, 2024

• #2

yes

 

J

Jackbracks

Member

• Feb 7, 2024

• #3

Monkey Boy said:

yes

Click to expand...

any ideas what the cause coudl be mate

 

S

Sitemonkey

Well-Known Member

• Feb 7, 2024

• #4

Jackbracks said:

any ideas what the cause coudl be mate

Click to expand...

Mortor in blocks still piss wet through

 

J

Jackbracks

Member

• Feb 7, 2024

• #5

Sitemonkey said:

Mortor in blocks still piss wet through

Click to expand...

it’s onto the old basecoat mate. Was solid so went over it with a tight couple of passes of vpi gris with mesh embedded

 

S

Sitemonkey

Well-Known Member

• Feb 7, 2024

• #6

Jackbracks said:

it’s onto the old basecoat mate. Was solid so went over it with a tight couple of passes of vpi gris with mesh embedded

Click to expand...

Fook knows then looks like you can see the outline of the block work to me . Someone on here will know pal . Used to see that on s/c jobs years ago

 

Topspread16

Well-Known Member

• Feb 7, 2024

• #7

Looks like water in sag cracks.

 

J

Jackbracks

Member

• Feb 7, 2024

• #8

Topspread16 said:

Looks like water in sag cracks.

Click to expand...

what do you reckon mate would this dry out ok eventually?
Don’t feel like it was sagging that much, but was wet like