Recent content by BobbyJack

Morning mate, first off the boarded walls are incorrect as you have pictured. Regardless of whatever finish your putting on your walls they should land and sit on top of the shower tray and not next to it. This aids water run off to definitely fall into tray. Over time with failings in sealant...

As said this can be done easily. I have used a product called feather it to fill the grout lines to make the surface flat. You can use microcement to do this and allow it to dry before microcementing the area. Downside to this it the expense of the product. Its a lot of money depending on the...

Looks as a micro cement floor should. Wasn't in barnet was it

Will get it at job tomorrow

Can't get a corner trowel on it. One side would run over the tiles and they are the smaller ones that are set at different levels

Multi fuel stove in a fireplace. Tiled on the inside of the fireplace. Boarded and plastered to a stop bead on the front of fireplace. This has cracked along the full bead on both sides assumingly due to heat from the fire. I'm here doing the extension but the owner has asked me to sort this...

New thread topic with 41st anniverary

All pretty much the same. I worked on the applicart building before they opened it. Beton just meant cement/concrete. Just another name for a marmorino finish

Hard to say exactly from picture but looks like a pitted marmorino. Can be done solely by trowel but easier to use a patterned roller on second coat to apply a texture that you lay down and it goes off leaving what looks like a cross section of a worm city. Looks natural in colour so no...

Do they still sell that model.

Anyone got a dewalt battery staple gun. In the market for a stapler and so far most manual guns are crap. It's a bit pricey but if it makes the task easier then worth the money