It was running at 15 bar with 20 metres of hose.
Wasn't compacted as when we start the 200 you have to slowly trickle the bag in bit by bit and it was doing in soon as it mixed and left gun. Was even doing it with water going through the hoses.
Is this a air issue?
We made the material wetter, ran machine wetter. No difference still sprayed in intervals of 5 seconds then it would sound like air and no material would come out for a split second
got my hands on second hand mtech 200.
Brilliant machine got the consistency perfect spraying Weber chaulk
For some reason when spraying it will pause after 5 seconds of spraying literally for a split second like a blip in the ribbon won't drop any consistency in material at all Just like...
Powder which hasn't mixed properly. After it's been scraped instead of digging it out and putting wet scrape material in its been left. Probably next day scrape and was on the hard side to do anything with. Rain gets onto the powder drives it out
If you have depth on he sills and sufficient drip on the roof line.
Micro primer and 6mm beads!
As long as it is isn't blown or hollow.
I have done that process before system had yet to fail neither have I EVER rubbed through at that thickness.
The ripples aren't from the application so say...
Mono blonco is terry ball.
Soon as you run a serrated edge through it it goes to piss. Prob spray 30 metres and fall back and rule off still wet and runs touch it with a spat it slumps. Helped a lad with a k4.. almost sprayed 40 metres still had to wait to spat it. Ritmo half the pace of a k4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.