smoothing old rough render

Members online

Status
Not open for further replies.
Any suggestions please.
I have re rendered front and back of a house due to it all being blown. The side of the house is solid so the client does not want it re rendered but its abit rough in places so she wants it smoothed off somehow.
Has anybody used a right angle grinder for this atall or can anybody recommend a way to get abit of a finish on it please.
 
All sounds abit much for what it is gents. Defo not tyrolene it voz it wont match our smooth back and front. And literally its about 1×3 metres and it just needs smoothing off a tad. Maybr some kinf of masonry belt sander if you know what i mean
 
Just to add. I think they are abit short on pennies so the whole big job etc is a no. They just want some1 to smooth it off and paint it up real quick
 
I would say for the sake of 3m2 just eml and top coat it as its already got the waterproofer in the back coat be the quickest other wise you will just be spending time and more of the clients money to get a good look easy for a mornings work
 
Belt sander ffs. Tell them it is what it is. Tyro. Thin coat or hack off. If they havent got any money there isnt a cheap alternative all of a sudden
 
We have just removed 170m2 in 3 days on a house ,bit of a nightmare but done ,3m2 take about 10 minutes :RpS_confused:
 
Right gents. This job is just dragging on now. Customers have now decided they want a new finish on it so.... as mentioned..
Could I just put a 1 coat system over the old and float finish?
 
Status
Not open for further replies.
Top