Ritmo air line connectors

Status
Not open for further replies.

Andy M

Active Member
Do any of the Pft guys stock these as its looking as mine are knackered?. The machine cut out mid spray today and I traced it back to the airline so jiggled the fitting (one way valve) with the cleaning tool and plugged it back into the comp outlet which just shut down again.
Never had this problem with Geka fittings but I need to renew these.
 
That is my biggest fear in life.
The machine packing up and puting it all on by hand.
 
Well what a shite day, luckily we were doing a first pass with full mesh when it happened. Since spoke to Les and he suggested jetting water through with the gun attached, which I will try. If that fails I will add new. The customer was watching,the lab had his hands in his pockets and the other spread new fook all about machines.
The best is while things were going great, the Lab decided to wash his hands on the cleaning coupling while we were spraying,thus back filling the hopper,c**t.
 
Well what a shite day, luckily we were doing a first pass with full mesh when it happened. Since spoke to Les and he suggested jetting water through with the gun attached, which I will try. If that fails I will add new. The customer was watching,the lab had his hands in his pockets and the other spread new fook all about machines.
The best is while things were going great, the Lab decided to wash his hands on the cleaning coupling while we were spraying,thus back filling the hopper,c**t.
How long you been machine based mate ?
 
That is my biggest fear in life.
The machine packing up and puting it all on by hand.
Mine is having a problem ,which are now few and far between :RpS_unsure: and Pft Northern (Les ) don,t answer :RpS_crying: never happen yet in 7/8 years :RpS_thumbsup:
 
Keith, about 5 years with the G4 and busy, but the Ritmo is a complete different kettle of fish mate. Ritmos are very sensitive where as G4s are quite agricultural.
 
Status
Not open for further replies.
Top