Rimto

Putzmiester · Jan 26, 2015

Alright lads
need to get a second pump and am thinking of a little rimto any advice on which one to get,how long do the sators last,can it handle mono ok it's only a second pump so I know it won't do what my g4 will do but around 30-40 m2 here and there,
any thoughts lads.

Wezly · Jan 26, 2015

Mainly use ours for mono and ocr, it pumps fine, I've got 12 pallets of Blanc du Literal out of a non clamp r/s, pumping it 12m high in some instances I should add.

PFTwales · Jan 26, 2015

I had 40 pallets of mixed renders out of my Ritmo L clamp stator

UKPlasteringmachines · Jan 26, 2015

Get the Ritmo L, I think there great machines

Wezly · Jan 26, 2015

UKPlasteringmachines said:
Get the Ritmo L, I think there great machines

Why did you sell me the M for then?

UKPlasteringmachines · Jan 26, 2015

Because the L wasn't out then ..... I'l put one on order for you mate

Wezly · Jan 26, 2015

Thanks, stick it next to my ZP3. I'll pick them up next time I pass.

PFTwales · Jan 26, 2015

You should part x ur M wezly. Its the right thing to do

Wezly · Jan 26, 2015

PFTwales said:
You should part x ur M wezly. Its the right thing to do

Is it a quicker output? Whats the difference between them?

I thought the 230v G4 was the way to go, until yesterday of course when we all found out your nobody without a pair of sp11's.

Rigsby · Jan 26, 2015

If you would be satisfied with a D4-3 on your G4 then a Ritmo L is the way to go.

Mine is a 240v which I bought because there is less chance of tripping (apparently) over the 110v. Something to do with amps.

it is so easy to move around, spits into 3 parts and each one can be handled by 1 person. Even the whole unit can be moved by 1 person but mine has to go up two battens onto the back of my truck so just a bit heavy on a steep incline so I take the motor off.

PFTwales · Jan 26, 2015

No difference in output. It will do the same as ur M. The L has a vibration unit which is great for emptying the hopper without thumpin it and the 2.2 kw motor will pump further which i have needed a few times on some jobs.

Wezly · Jan 26, 2015

What will it pump to then? Bit more length is often needed I won't lie.

Rigsby · Jan 26, 2015

Wezly said:
What will it pump to then? Bit more length is often needed I won't lie.

20m. Had to do it once.

The Ritmo is so light I can usually get it within 15m and preferably 10m.

UKPlasteringmachines · Jan 26, 2015

Pumps everything the M does, the vibrator is good makes it less dusty as the hopper empties,

UKPlasteringmachines · Jan 26, 2015

Its just a stronger machine

PFTwales · Jan 27, 2015

If the material is good quality you will get 20 mts material hose on the Ritmo M. say for instance you have 15 mts on and its pumping fine at 10-12 bar then it will take another 5 mts.
The L is supplied with a 15 and a 5 mt hose

Andy M · Jan 27, 2015

THeres a cracking Ritmo Poercoat on the bay , render set up also.

Putzmiester · Jan 28, 2015

Thanks everyone for your advice,I've seen the one on ebay just a bit soon after Xmas prob looking around April-May would go to stu at ukplastering machines as he's my local dealer
and always a safe but I was just looking for a few different views which you have all give me cheers guys

dai dog · Jan 29, 2015

Cracking little machine!

User___removed · Jan 29, 2015

What's a RIMTO????

nickelarse · Jan 29, 2015

It's like vimto

Rimto

Share this page

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

TPF Special Forces

Well-Known Member

Well-Known Member

TPF Special Forces

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Member

Well-Known Member

Private Member