Right the eze 24

Members online

Status
Not open for further replies.

dazgunner

New Member
Being Honest . My shoulders are started to ache I do affair bit float and set & skimming we are a gang of 2 sometimes 3 so I am thinking about this machine after Xmas so I am looking for some straight answers


1) CAN THIS MACHINE SPRAY FINISH WHICH SORT

2) CAN IT SPRAY HARDWALL

3) HOW EASY IS IT TO CLEAN AND SET UP

4) IF I BUY ONE WILL I NEED TO BUY DIFFERENT NOZZELS FOR DIFFRENT MATERIAL

5) I SEE THIS MACHINE IS AIRLESS TO BE HONEST I HAVENT GOT A CLUE WHAT THIS MEANS AND IS SPRAYING Messy

6) WILL I NEED A 5KVA GENERATOR


LOOK FORWARD TO YOUR REPLIES CHEERS DARREN PS NICK THANKS FOR THE REPLY :rolleyes)
 
Have a look at past posts on this subject.there is only one guy on here who has one so have a look at that.look into the machines info and what the machine is capable of doing.
If you are doing hardwall/float and set,the pft ritmo would be more suitable in my opinion.
There loads of videos online showing this machine in action
 
I personally would go for the machine that is an all rounder, with the ritmo it will mix and pump hardwall all day long its quick and easy to clean out and it will also spray skimming, and most renders

The 110v runs off either a 5kva transformer or if a genny is needed then this would need to be at least an 8kva
 
Being Honest . My shoulders are started to ache I do affair bit float and set & skimming we are a gang of 2 sometimes 3 so I am thinking about this machine after Xmas so I am looking for some straight answers


1) CAN THIS MACHINE SPRAY FINISH WHICH SORT

2) CAN IT SPRAY HARDWALL

3) HOW EASY IS IT TO CLEAN AND SET UP

4) IF I BUY ONE WILL I NEED TO BUY DIFFERENT NOZZELS FOR DIFFRENT MATERIAL

5) I SEE THIS MACHINE IS AIRLESS TO BE HONEST I HAVENT GOT A CLUE WHAT THIS MEANS AND IS SPRAYING Messy

6) WILL I NEED A 5KVA GENERATOR


LOOK FORWARD TO YOUR REPLIES CHEERS DARREN PS NICK THANKS FOR THE REPLY :rolleyes)


Hi @dazgunner,

Sorry for the late reply. Here are the answers to your questions:

1. Can this machine spray finish and what sort: The EZE24 will spray finish, it will spray any thin coat plaster

2. The EZE24 can spray hardwall

3. The EZE24 is very quick and easy to set up and clean down. Set up will take approximately 10 minutes and clean down will be the same. The EZE is very simple to operate, it consists of 1 variable speed dial and 1 on and off button

4. The EZE 24 comes with 2 Nozzles, this will cater for Render, Thin-coats, Hardwall and Plaster. We do advise the skimming setup should be purchased if your aiming to do a lot of skimming. This will cost £460.00 + VAT - we are aiming to reduce this cost

5. The EZE 24 will also spray airless material. You will need the airless setup for this costing again, £460.00. Airless Plastering is relatively clean, you will need to mask up still.

6. The EZE24 is 110v and the machine and Air Compressor will run directly from 1 x 110v 5KvA continuous transformer

The EZE 24 has a standard output of 14l but we will have a new R/S available Mid jan with an output of approximately 20l - this still needs to be confirmed.


I hope this answers your questions?

If you need anymore information please do not hesitate to let me know or if you wish to have a demonstration on the machine please give me a call

Ryan
 
Last edited by a moderator:
Thanks for your reply Ryan I would like a demo before I buy or hire I will contact you when I return to work 0n the 5th are u back next week at all cheers Darren
 
Hi Darren,

We start back on the 5th as well. Let me know when your looking for the demo and I will get you booked in.

If you are hiring or purchasing the EZE 24 we provide a full training session free of charge.

If you have any more questions in the meantime please do not hesitate to get in touch
 
Status
Not open for further replies.
Top