xyzplasterer
New Member
Laid on hydraulic lime finish coat today waited for it to pick up a bit and then used trowel to flatten off.
I was told to finish the lime using my trowel by the guy in the builders merchant, I found that the trowel pulled to much on the lime and was tearing in places.
I've been reading up on line and some data sheets recommended finishing the top coat with wood or sponge float...
Anyone got any advice?
I was told to finish the lime using my trowel by the guy in the builders merchant, I found that the trowel pulled to much on the lime and was tearing in places.
I've been reading up on line and some data sheets recommended finishing the top coat with wood or sponge float...
Anyone got any advice?